Part Location Diagram of CW0013 Senco Reed Valve
See part A-CW0013 in the diagram
( Grid squares measure 1x1 inch )

Reed Valve CW0013

Manufactured by:
Senco
ERP Number:
ERP10072036
Part Number:
CW0013
Original Equipment Manufacturer ?
  Works with your model  PC1131!
$8.95
In Stock
Delivers in 3-5 Business Days!

Easy 

15 - 30 mins 

(2 rated repairs) ?
  Works with your model   PC1131!

Product Description

?

This is a high-quality component which is sourced directly from the original equipment manufacturer for use with Senco air compressors. The reed valve is placed in the cylinder head assembly in the valve plates to control the flow of air into and out of the cylinder. Unfortunately, over time it may wear out or get damaged eventually requiring a replacement to keep your equipment performing like new. You may require a screwdriver and a wrench set to perform this repair. Note, the reed valve is sold as an individual part. Check the diagrams for your model to ensure the correct replacement procedure.

Troubleshooting

This part works with the following brands:
  • Senco
This part works with the following products:
  • Compressor

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(2 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Compressor wouldn\'t fill up valve gasket broke

Allen from Fairview, Tennessee

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers, Socket set, Wrench (Adjustable)
Parts Used:
CW8014, CW4202, CW4130, CW4122, CW0013
Removed head bolts
Took apart all gaskets and scrapped any leftover off
Replaced all gaskets and put in new Reed\'s
Tip put just a dab of axle grease on each side of Reed\'s to hold in place
Re assemble pay attention to the way the Reed\'s flex for intake and exhaust
Did you find this story helpful?
Thank you for voting!

Wouldn\'t build pressure

James from Rehoboth, Massachusetts

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Wrench (Adjustable), Wrench set
Parts Used:
CW4122, CW0013
Removed the screws from the head. Then slowly remove the head gasket as not to tear it. Remove one valve plate. Then remove the reed valves and the valve gasket, and install the new parts. Put all the parts back together in reverse order.
Did you find this story helpful?
Thank you for voting!
  • 1