This is an authentic Senco replacement part, sourced from the original manufacturer for use with air compressors. The special switch is used to turn the motor on to add air to the tank and to shut off the motor when the desired pressure is met. this pressure switch set is available as an individual replacement part.
Troubleshooting
This part works with the following brands:
Senco
This part works with the following products:
Compressor
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Open the old switch and disconnect electrical leads in and out. Remove the wires from the box. In order to remove it, you need to disconnect the supply line from the tank. In my case I had to also remove the motor cover in order to also remove the outlet valve, the regulator and also so pressure gauge in order to spin off the whole assemb
... Read morely from the pressure switch to the air outlet. Once all is disassembled, connect new pressure switch then reconnect the feed line with the knew enclosed fitting. Then continue to reconnect fittings as you go. ( regulator handle must go on last AND don\'t forget to put back on motor cover before the rest of the fittings) It\'s simple if you just pay attention to the order that you disassembled it. Helpful tip is to use thread tape for leak free connections
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10070890
Manufacturer Part Number: 2E21025TBQJ
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
