Part Location Diagram of 105-0015 Powermate Regulator Repair Kit
See part B-16 in the diagram
( Grid squares measure 1x1 inch )

Regulator Repair Kit 105-0015

Manufactured by:
Powermate
ERP Number:
ERP9877211
Part Number:
105-0015
Original Equipment Manufacturer ?
  Works with your model  215902!
Special Order

Easy 

15 - 30 mins 

(4 rated repairs) ?
  Works with your model   215902!

Product Description

?

It is a genuine regulator repair kit that is supplied by the original equipment manufacturer for use with Powermate electric air compressors. Unfortunately, over time components will wear out and may begin to malfunction, eventually requiring replacements to ensure your equipment functions properly. The kit contains all the necessary parts to repair a regulator. To ensure the proper replacement procedure, refer to the owner's manual and the diagrams for your model. A screwdriver and a wrench set might be needed to perform this repair.

Troubleshooting

This part works with the following brands:
  • Powermate
This part works with the following products:
  • Compressor

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(3 Reviews)
Click to filter by ratings:
  • 5 stars
    3
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(4 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Regulator was not increasing air pressure on the output side, leaking

mike from Pompano Beach, Florida

4 of 4 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
Parts Used:
105-0015
Removed cover 6 phillips head screws, unscrewed the regulator handle, pulled out the spring, plastic diaphragm and O ring, installed the new one. put it back together. very simple fix
Did you find this story helpful?
Thank you for voting!

Regulator leaking

Douglas from Huntsville, Alabama

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Parts Used:
105-0015
Installed rebuild kit in regulator
Did you find this story helpful?
Thank you for voting!

no pressure out hose

Russell from Middleburg Hts, Ohio

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Parts Used:
105-0015
used replacement part
Did you find this story helpful?
Thank you for voting!

Regulator did not turn air on

Curt from Canandaigua, New York

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Parts Used:
105-0015
Disassembled housing took regulator apart found plastic center pin broken replaced part re assembled with new part worked perfect.
Did you find this story helpful?
Thank you for voting!
  • 1