This is a genuine manufacturer supplied pressure regulator for Porter Cable Air Compressors. This part adjusts the pressure of the air coming from the tank to the desired level. Includes Regulator Body, Two (2) Brass Quick Connect Fittings, One (1) Elbow Fitting, And a Regulator Knob. Make sure to unplug the air compressor release all the air from the tank before installing this part.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Easy change out
Fit perfectly
Guest - November 30, 2019
Verified Purchase
★★★★★
★★★★★
Perfect
Awesome service back in action! Highly recommended.
Guest - January 16, 2020
Verified Purchase
★★★★★
★★★★★
Very good fits exactly
I always get my parts and slape it right on. Thanks ER
Guest - March 27, 2021
Verified Purchase
★★★★★
★★★★★
manifold for PORTER cABLE COMPESSOR
Part was exactly what I needed,installed with no surprises.back in business received the part quickly,,,,,completely satisfied
Guest - June 19, 2021
Verified Purchase
★★★★★
★★★★★
Very good service and quick delivery.
Was the perfect part. Fit like it should and works like a new one, very satisfied with the part and quick delivery.
Guest - March 22, 2023
Verified Purchase
★★★★★
★★★★★
Easy Repair
Being a complete manifold made it easy to replace.
Richard - April 10, 2023
Verified Purchase
★★★★★
★★★★★
TWO THUMBS UP
In terms of having the right part(s) for a wide variety of tools and tool brands, I've yet to stump these folks. They seem to have everything! I've experienced nothing but friendly, knowledgeable sales representatives, fair prices, and prompt delivery. A great source for tool repair parts
Guest - August 17, 2023
Verified Purchase
★★★★★
★★★★★
Compressor manifold replacement
The replacement manifold I received was perfect! Easy to replace, and fit like a glove. I was absolutely satisfied with my order, and will definitely order from eReplacementParts in the future, should the need arise. Thank-You!
Guest - August 1, 2019
Verified Purchase
★★★★★
★★★★★
Quality product, good service, on time...
Perfect fit. It took about 5 minutes to install and I was back up and running. eReplacement Parts was right on the money. - thanks.
Guest - October 25, 2019
Verified Purchase
★★★★★
★★★★★
Drop-in replacement, took about 5 minutes
This was an easy replacement for a leaky manifold. The only part I needed to finish the job was a replacement hose clamp.
Guest - June 9, 2020
Verified Purchase
< Prev
1
2
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Repair kit not available. Too bad. Replacement manifold worked great! The only thing that was not obvious was that the two screws that mount the manifold to the unit had no receptacle to screw into. Not threaded. Decided to just use the existing screws, they were self-taping (they could have said that with the product) and everything w
... Read moreorked fine. Great company. Will use again.
Unplug compressor. Drain air pressure. Remove 2 screws in mounting bracket. Drop old manifold through mounting face. Cut factory installed supply hose clamp at the manifold hose mount. Remove hose clamp. Remove hose from manifold Hose fitting. May need screwdriver(s) and little wd-40 to slip off. Remove existing Pressure gauge and reseal
... Read moreand install in new manifold. Make sure to tighten to correct position. Use proper wrenchs. Slip new hose clamp onto existing supply hose. Make sure manifold hose fitting is mounted in the same position of old manifold. If not, tighten until same position is achieved. Reattach supply hose and tighten new hose clamp over hose and fitting. Replace manifold in mounting bracket. Pre start or hand thread 2 self tapping mounting screws through bracket and into manifold. Drive or tighten into manifold with power drill and nut driver. Turn regulator screw all the way out to set line pressure to 0. Plug in compressor. Built up supply supply. Run till compressor charges and shuts off. Listen and check for leaks at gauge with soapy spray or leak check. If no leaks adjust regulator knives in until desired line pressure is reached.
Mine installed in less than 10 minutes with no leaks and no problems. This part came ready to mount and included 2 new spring loaded hose couplers installed. I was impressed.
Remember; you must use drill and nut driver or pre thread self tapping screws into new manifold to mount properly and tight.
You will have all new parts needed except 1/2\" hose clamp.
Remove the two screws that hold the manifold to the face plate. Remove the captive ring around the regulator. Remove the air hose. The hardest part about installing the new manifold is reattaching the air hose. I didn\'t have a tool to crimp the hose clamp so I just replaced it with one you use a screwdriver to tighten.
Just removed old regulator manifold assembly and replaced with the new one. Needed to take air supply nipple off old one and put it on new one. The only difference I saw was the original regulator was rated at 135psi. And the replacement was only rated to 125psi. other wise was exact match.
Did you find this story helpful?
Thank you for voting!
Air was leaking from the regulator assembly on the original manifold. I replaced the entire manifold which was a simple operation.
It is pretty simple. Just look at how the original was installed, take a picture with your phone if you have a short memory, and assemble the replacement the same way....
Did you find this story helpful?
Thank you for voting!
The pressure adjustment control leaked...found the brass extension was damaged and wouldn\'t seal.
I remove the four bolts that hold the manifold pressure on the compressor the two bolts that hold the manifold on to the bracket I remove them I put the new manifold in place but the two bolts then put the other for both Center and I was done very very easy
Replaced manifold and gauge.
The difficult part was finding the part as most of the model number had worn off, but we were able to work with your staff and determine the the correct replacement part.
Compressor
- 2.5 HP 4 Gallon Oil-Lube Air Compressor
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
