Part Location Diagram of 630-009200035 Jenny Capacitor-60mf
See part 18 in the diagram
( Grid squares measure 1x1 inch )

Capacitor-60mf 630-009200035

Manufactured by:
Jenny
ERP Number:
ERP10375299
Part Number:
630-009200035
Original Equipment Manufacturer ?
  Works with your model  AM780!
$125.83
Special Order

Easy 

30 - 60 mins 

(4 rated repairs) ?
  Works with your model   AM780!

Product Description

?

This is an OEM part sourced directly from the manufacturer. The capacitor is found in compressor pumps from Jenny. This is a complete capacitor assembly, with a high-quality plastic housing and metal connections. It is used to provide start-up power to the machine. You may require a screwdriver when replacing this part. This item is sold individually.

Troubleshooting

This part works with the following brands:
  • Jenny
This part works with the following products:
  • Compressor

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

30 - 60 mins 

(4 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Motor wouldnÆt run at full speed even under no load

Wayn from Bennington, Vermont

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers, Wrench set
Parts Used:
630-009200035, 140-1074-01
1. Removed old switch
2. Removed motor from frame
3. Removed motor cover
4. Removed capacitor
5. Reversed process to re-assemble

Both parts were EXACT replacements for original so replacement process was textbook!
Did you find this story helpful?
Thank you for voting!

The capacitor went bad

Patty from Butler , Pennsylvania

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Wrench set
Parts Used:
630-009200035
Removed the old part. Got it checked. Found out it was bad. Put a new part in
Did you find this story helpful?
Thank you for voting!

The pump on my compressor would not turn on

Dennis from Cataumet , Massachusetts

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers
Parts Used:
630-009200035
I pulled off the cover and detach the capacitor and replaced it with a brand new one very simple job
Did you find this story helpful?
Thank you for voting!

Would not start, kept on tripping the breaker in the electrical panel

James from Saugus, Massachusetts

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
Parts Used:
630-009200035
Simple fix, just needed the right part, small air compressor for my nail guns
Did you find this story helpful?
Thank you for voting!
  • 1