- This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
- New stock is on the way! On order parts usually ship within 7 business days.
- Item is not in stock and usually ships 10-15 business days from the time you place your order.
- This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
Pressure Switch E108524
- Manufactured by:
- Husky
- ERP Number:
- ERP12099628
- Part Number:
- E108524
Does this part fit my model?
Need help finding your model number?Troubleshooting
- Husky
- Compressor
Customer Part Reviews
?- < Prev
- 1
- Next >
Questions & Answers
?
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
- < Prev
- 1
- Next >
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Hi Danos, Thank you for contacting us. This could indicate a faulty Pressure Switch. We suggest testing the Pressure Switch with a Multimeter to check the continuity. We hope this helps!
Hello Jeff, thank you for your questions. If the compressor won't start with air in tank, replace the check valve # E106618. If the compressor won't start with an empty air tank, replace the pressure switch E108524 if it isn't activating the pump motor. Replace the pump motor #E107853 if it doesn't start when activated by the pressure switch. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
Hello Keith, Thank you for writing. This could indicate the Pressure Switch Part Number: E108524 is faulty and may need to be tested or replaced. We hope this helps, good luck with the repair!
Hello Silverio, Thank you for writing. We suggest testing the Pressure Switch Part Number: E1085204 with a Multimeter to check the continuity. Thank you for the inquiry, good luck with the repair!
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
- < Prev
- 1
- Next >
Motor would not stop running
Steve from Milford, Ohio
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
- Parts Used:
- E108524
2. disconnect electrical plugs from part (labeled connector pairs to match up properly)
3. remove hose from part
4. Install new part
5. reconnect all connections to new part
6. replaced housing
Leaky hose die to corrosion
Michael from WATERFORD, Michigan
compressor stops running before adequate pressure
Johnie from DOUGLASVILLE, Georgia
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
- Parts Used:
- E108524
Disconnected pressure hose from old switch
reconnected pressure hose to new switch
swapped electrical connections from old to new
replaced the cover
- < Prev
- 1
- Next >
Model Cross Reference
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.