Part Location Diagram of 5140235-39 DeWALT Pressure Switch
See part 131 in the diagram
( Grid squares measure 1x1 inch )

Pressure Switch 5140235-39

Manufactured by:
DeWALT
ERP Number:
ERP16680023
Part Number:
5140235-39
Original Equipment Manufacturer ?
  Works with your model  D55153!
In Stock
Delivers in 3-5 Business Days!

Easy 

30 - 60 mins 

(2 rated repairs) ?
  Works with your model   D55153!

Product Description

?

The pressure switch tells your compressor when to start and stop building up pressure. This is an authentic manufacturer supplied replacement part that is specially designed for Dewalt air compressors. Common symptoms of a faulty pressure switch include a motor that continues to run regardless of pressure until the safety valve opens, or a compressor that simply will not turn on at all. Please note this part is sold individually, to replace it you will need: screwdriver, wrench set, pliers and thread sealing tape.

Troubleshooting

This part works with the following brands:
  • DeWALT
This part works with the following products:
  • Compressor

Customer Part Reviews

?
4.2
Average Rating (out of 5):
★★★★★
★★★★★
(5 Reviews)
Click to filter by ratings:
  • 5 stars
    4
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    1
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

30 - 60 mins 

(2 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Pressure switch on DeWalt twin 4 gal compressor had broken

Bruce from Salem, Ohio

7 of 7 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Wrench set
Parts Used:
5140235-39
Extremely easy repair. Only six wires to disconnect from the broken switch and re-connect on the new one, plus two air line fittings. Make a note of where the wires connect before removing the old switch, and you\'ll be fine.

It took me a little longer than was absolutely necessary because I stripped the wires back to make sure I had good connections. If you don\'t have to do that, the repair would have taken less than ten minutes.
Did you find this story helpful?
Thank you for voting!

Broken pressure switch

Anthony from CLARK, New Jersey

3 of 3 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Wrench set
Parts Used:
5140235-39
Removed the parts from the old pressure switch that are not included with the new one. Open the cover, made a wiring diagram and disconnected the wires. Installed the new switch, connected the wires and installed the parts on it.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP16680023
Manufacturer Part Number: 5140235-39
Brand Model Number Description
DeWALT D55153 Compressor - Compressor
DeWALT D55154 Compressor - Compressor