Part Location Diagram of 5140206-30 DeWALT Gasket
See part 4 in the diagram
( Grid squares measure 1x1 inch )

Gasket 5140206-30

Manufactured by:
DeWALT
ERP Number:
ERP16679557
Part Number:
5140206-30
Original Equipment Manufacturer ?
$6.16
In Stock
Delivers in 3-5 Business Days!
Minimum Quantity of 2 required

A Bit Difficult 

15 - 30 mins 

(3 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

It is a genuine item that is supplied directly from the original equipment manufacturer for use with DeWALT air compressors. This is an identical replacement for a worn or a missing gasket that is utilized to provide an air-tight seal for the valve plate, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. It is a high-quality component which is made of durable composite material and is sold individually.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • DeWALT
This part works with the following products:
  • Compressor

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

15 - 30 mins 

(3 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Compressor would not pump up to normal pressure

Robert from CHERRY HILL, New Jersey

2 of 2 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Socket set, Wrench set
Pulled head off of compressor, inspected reed valves. One was broken. Replaced both valves and gaskets. Re assembled and tested.
Did you find this story helpful?
Thank you for voting!

My Dewalt compressor would only reach 65 psi

Efrain from Salinas , California

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Wrench set
Parts Used:
5140206-34, 5140206-30
Removed cylinder head and discovered head gasket torn in the middle. Installed a new gasket set for valve plate to correct operation
Did you find this story helpful?
Thank you for voting!

Compressor wouldn\'t go above 50psi

Michael from Peoria, Illinois

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set, Wrench set
Parts Used:
5140206-30
Removed the shroud, removed 4 head bolts, modified the gasket because the bolt hole circle wasn\'t big enough, and put it back together. I knew it was the wrong one when I ordered it but for 7 dollars, it was worth a chance and it worked. I appreciate the 1\" grid in the picture of the part. Three inches is what I needed and yours was 2 7/8 or so. Everything fit after I cut the bolt holes farther from center. Great job, great price and if the gasket blows again, I will be back.
Thank you...
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP16679557
Manufacturer Part Number: 5140206-30
Brand Model Number Description
DeWALT D55153 Compressor - Compressor
DeWALT D55154 Compressor - Compressor