This is a genuine manufacturer sourced replacement kit designed for use with Campbell Hausfeld air compressors. Includes: Valve Plate, 2 Reed Valves & Pins, 3 Gaskets. The purpose of the valve plate is to allow into the cylinder. Once the piston starts traveling up the reeds on the valve plate open and air is sent into the air tank. Overtime the valves and gaskets will become worn and would need to be replaced. To complete this repair you would need a wrench set and a screwdriver.
Troubleshooting
This part works with the following brands:
Campbell Hausfeld
This part works with the following products:
Compressor
★
Customer Part Reviews
?
4.8
Average Rating (out of 5):
★★★★★
★★★★★
(13 Reviews)
Click to filter by ratings:
5 stars
10
4 stars
3
3 stars
0
2 stars
0
1 star
0
< Prev
1
2
Next >
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
EASY TO FIX, YOUR ADVICE ABOUT THE PROBLEM WAS RIGHT ON
GOOD PARTS FIXED MY PROBLEM, THANK YOU FOR BEING HELPFUL
Guest - April 29, 2019
Verified Purchase
★★★★★
★★★★★
Got what I needed and fast delivery!
I ordered parts for my compressor and 2 days later I had them! The parts were correct even though they were for another brand. Thanks!
Guest - May 21, 2019
Verified Purchase
★★★★★
★★★★★
Easy Repair
Everything was there to complete the repair.
Guest - September 1, 2019
Verified Purchase
★★★★★
★★★★★
Got the parts I needed in record time. Very happy.
The part was exactly what I needed to repair my air compressor. The transaction was completed correctly, and fast. Will definitely do business again.
Guest - September 3, 2019
Verified Purchase
★★★★★
★★★★★
compressor now working
The part i recieved was a perfect fit. Easy to install and was in good shape when it arrived.
Guest - September 20, 2019
Verified Purchase
★★★★★
★★★★★
Worked Great
Arrived quickly and was a great Part easy repair.
Guest - November 8, 2019
Verified Purchase
★★★★★
★★★★★
Easy repair kit
The product came in as expected with good packaging. It fits exactly on my unit. Now i am happy that I can use my compressor again!
Guest - May 5, 2020
Verified Purchase
★★★★★
★★★★★
Part was the right fix.
Plate took care of issue on my Air compressor. Back in service thanks to the prompt parts delivery.
Guest - January 22, 2022
Verified Purchase
★★★★★
★★★★★
Correct part for my Compressor
Arrive on time, correct pats and good Price thank you
Replace it was so easy
Anonymous - June 1, 2022
Verified Purchase
★★★★★
★★★★★
Perfect fit
Had it fitted in minutes, compressor like new again !
Iglobal - July 13, 2022
Verified Purchase
< Prev
1
2
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Remove the air filter.
Remove the line to the cylinder head and the valve from the head.
Remove any trace of the gasket from the cylinder or cylinder head.
Install the new valve plate and gaskets as shown in the diagram at ereplacement.
Install the lines, air filter.
Run it up to pressure and check for leaks
... Read more with soapy water from a small spray bottle.
Better than replacing the whole compressor!!!
Remove the cylinder head
Removed the gaskets and plate in the order they were in
Cleaned the gasket surfaces
Installed the new parts in the same order as the old ones
Installed the cylinder head back on
Compressor is now working great
Remove shroud. Remove four bolts on piston jug and remove copper pipe connection. Separate jug top. Discard old gaskets and scrape all surfaces clean. Install new gaskets and reed valves. Reassemble. Simple repair. Great kit. Wasn\'t expecting gaskets. Had already traced and cut replacements. Thanks.
The time to complete was due to the difficulty of removing the bolts as the cooling fins were machined too close to the bolts. If I had a very thin wall socket, this may have not been a problem. Cleaning/scraping the old gasket off took some time and patience, it was green and looked like a sealing glue was used.
I did not use the
... Read more bottom gasket as it required me to pull the head off completely and I was afraid that I would not get the piston back in. As this is in the low pressure oil section, I thought this would not be a problem and the old gasket seemed in excellent shape.
I ground down some of the cooling fins and installation went smoothly. The compressor pumped right up and shut off... Beautiful!
Read less
Did you find this story helpful?
Thank you for voting!
Head gasket was broken and leaking at valve plates
Replaced cracked cylinder head, broken cylinder, valve plate assembly
Simple, disassemble, reassemble.
Caution, do not use excessive torque on cylinder head and cylinder.
They are made of very soft materials, and are actually fragile.
Just snug the cylinder heat bolts, very lightly, just enough to make a leak proo
... Read moref seal, or the cylinder and head will crack. Try to do them evenly, probably less that 10 ft. lbs of torque.
Pulled the top off and found a reed valve was shattered. Found this set online and thought might as well replace everything. If you can turn a wrench. You can do this.
1. Removed the head, the valve plate, and the valve reed.
2. Removed all old gasket material.
3. Reassembled using new parts and gaskets.
4. Removed the filter housing.
5. Installed the new filter.
6. Reassembled and tested.
Removed air cleaner and shroud.
Removed the 4 14MM valve head bolts.
Removed valve head, clean all mating surfaces removing all old gasket material.
Replace gaskets reed valves and reed valve plate.
Reassemble all parts in reverse order.
Tighten 4 head bolts in a criss cross pattern torquing equally.
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
3
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10243074
Manufacturer Part Number: HL026100AV
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Bracket or Flange","title":"Bracket or Flange","url":"/parts/power-tool/compressor/brackets-and-flanges/"},{"position":2,"name":"HL026100AV","title":"HL026100AV","url":""}]
_WW_2.gif "Part Location Diagram of HL026100AV Campbell Hausfeld Valve Plate Kit")
_WW_2.gif "Part Location Diagram of HL026100AV Campbell Hausfeld Valve Plate Kit")
