This valve plate assembly is an OEM part direct from Campbell Hausfeld. The set includes the valve plate assembly and two cardboard composite gaskets. This part is compatible with many air compressor machines, and is fitted onto the cylinder head and fasteners. This component has been designed to prevent damage to engine parts and absorb leakage. A wrench and a screwdriver may be needed to make the removal and replacement. This part is sold individually. It is recommended to refer to engine manual and diagrams for further instruction.
Troubleshooting
This part works with the following brands:
Campbell Hausfeld
Husky
This part works with the following products:
Compressor
★
Customer Part Reviews
?
3.8
Average Rating (out of 5):
★★★★★
★★★★★
(4 Reviews)
Click to filter by ratings:
5 stars
2
4 stars
1
3 stars
0
2 stars
0
1 star
1
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Appears well built, works perfectly
It is nice to receive a replacement part that fits and works perfectly.
Guest - May 18, 2019
Verified Purchase
★★★★★
★★★★★
Worked as expected
Air compressor is up and working.
Guest - October 17, 2019
Verified Purchase
★★★★★
★★★★★
Wrong part
Wasn't the part we needed, but was concerned that it was wrong from the beginning. The person we dealt with on the phone was very nice and told us we could return the part if it was wrong. A little confusion on the return process but in the end it was made right. Will still continue to order from e-replacement.
Guest - September 17, 2019
Verified Purchase
★★★★★
★★★★★
new part broke again after 2 months
very disappointed in the quality. original part lasted over a year. first replacement lasted 2 months
Guest - September 13, 2019
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
I called the name of compressor company. They gave me the number to eReplacement Parts. The lady that assisted me diagnosed the problem that she felt was the issue. I ordered the air compressor valve plate as she recommended.
When I received the part which took about 10 days, I started the repair.
1. Turned switch off
... Read more />2. Unplugged unit
3. Unbolted the air compressor pump head.
4. Removed the head from the pump being careful to notice what order and direction the valve plate and gasket was in the unit.
5. Removed the valve plate and installed the new one
6. Bolted the air compressor pump head
7. Tighten the head down tight without over tightening.
8. Plugged the unit back in to electrical outlet
9. Turned compressor switch back to automatic position
10. Compressor started and immediately started filling the air tank as it should.
11. Job complete and me happy. Thanks to eReplacementParts.
1. Drain all the air out of the tank.
2. Take off the plastic belt cover.
3. Take off the inlet pipe from the head to the tank.
4. Take off the head and valve plate assembly.
5. Separate the head and the valve plate assembly.
Note: they might have a bunch of paint holding
... Read more Them together.
6. Clean off the head surface the cylinder surface and make sure the cylinders are clean of any debris.
7. Now Reassemble - make sure you tighten the head bolts properly.
Note. Mine looked like the head bolts had silicone on the Thread ends so I put some back on mine.
Removed 6 bolts holding the head and valve plate on.
Lift off head and plate,separate valve plate and discard.
Install new plate on cylinder, install head and 6 bolts, torque bolts.
Done.
I removed the valve plate and cylinder head.
I cleaned the old blown gasket off of valve plate and blocks edges.
compressed the rings with a hose clamp and installed the pistons back into the block.
installed new gasket and valve plate assembly.
Torqued head bolts and valve bolts to specs.
cost 50 to repair
... Read more instead of 1000 for new air compressor.
Read less
Did you find this story helpful?
Thank you for voting!
One of the reed valves on my valve plate was broken. This happens with age (2004 model)
Unplug compressor!!!! Unscrew line compression nut. Remove head bolts. Tap head assy with plastic hammer and split head and valve plate. Clean gasket surfaces on cylinder and head. Make sure to remove all of the old gasket and you have a clean dry surface. Install new gaskets and o-rings. They came with valve plate kit. Bolt down and torq
... Read moreue head assy. Make sure to torque to spec. Reinstall pressure line. plug in , turn on and you start making air again
1. Loosed the copper air line from head.
2. Removed four top bolts.
3. Took the top head off.
4. Took the reed plate off.
5. Scraped all old gasket off.
6. Sprayed with carburetor cleaner.
7. Wiped head and cylinders off with a clean micro cloth.
8. Put new gasket and O-ring then reassembled.
I cut power, drained air tank and disassembled compressor head. I payed attention to the torque of the head bolts. I feel this should have been in with the valve plate parts.
I then cleaned the gasket area and replaced the valve assembly and use the new gaskets.
Then torque the head bolts down and started the compressor. Also
... Read moreI had to disconnect the delivery air tube and reconnect it after the head was back one. It was a simple job. The only thing was hard to find the torque spics. Ernie.
1. Removed air tube from head to tank.
2. Removed 6 bolts retaining head, removed head.
3. Removed and discarded valve plate.
4. Cleaned gasket from mating surface.
5. Installed new gasket and valve plate.
6. Replaced head, bolts, and air tube.
Fast and easy, saved money.
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10054036
Manufacturer Part Number: VT491100AV
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
