Genuine Hamilton Beach replacement kit. The purpose of this Gauge is to let you know how much water to pour into the Coffee Pot, it is gauged to let you know how many cups you want to make. Once the Coffee is made it lets you know how much Coffee you have left in the pot.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Merci la pièce est parfaite
Merci la pièce est parfaite
Iglobal - November 25, 2021
Verified Purchase
★★★★★
★★★★★
Easy repair. Detailed instructions.
fit perfectly, repair easy, great instructions!
Guest - July 28, 2022
Verified Purchase
★★★★★
★★★★★
Customer Service and part
Customer service is the most important quality I look for in a company! The service rep was knowledgeable, helpful and patient with my questions. The coffee urn part was shipped that day and I was able to fix it as soon as I received it a few days later. I will always begin my search for parts with this company first!
Guest - November 9, 2022
Verified Purchase
★★★★★
★★★★★
Easy Fix!
Got the water gauge for a 60-cup coffee maker which now makes it functional. Was an easy repair.
Guest - September 14, 2019
Verified Purchase
★★★★★
★★★★★
Muy buena, excelente, estoy satisfecho.
La cafetera de 60 tazas con su pieza de remplazo de indicador de agua 360°, quedo nueva nuevamente y funcionando a perfección.
Iglobal - September 12, 2023
Verified Purchase
★★★★★
★★★★★
Water Gage
The part was packaged for travel and arrived same and in good order
Guest - April 24, 2019
Verified Purchase
★★★★★
★★★★★
Easy to put on
Took about a week to get but arrived in great condition. It was very simple to install and works great.
Guest - September 10, 2019
Verified Purchase
★★★★★
★★★★★
Broken part
When we installed our part it broke immediately. I called and they replaced the part immediately. The second attempt worked fine. Very courteous staff to work with.
Guest - November 26, 2019
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Unscrew plastic nut on bottom of tube,remove old tube. Reuse old rubber washer on the bottom of the tube replace the new tube, tighten plastic nut. Check for leaks.
1.0 Unscrew the broken seal at the bottom of the water gauge by hand.
2.0 Remove the broken water gauge.
3.0 Temporarily remove the cap on top of the new water gauge.
4.0 Insert the top of the new water gauge through the top bracket on the coffee maker (the bracket rotates +/- about 30 degrees to allow this).
5
... Read more,0 Set the bottom of the new water gauge on the sealing flange at the bottom.
6.0 Ensure the writing on the glass gauge is centered outward.
7.0 Hand Tighten the seal nut onto the threads at the bottom of the gauge.
8.0 Put the cap (see step 3.0) back on the top of the water gauge (we have to put a strip of tape over it to ensure it stays on day in and day out).
1. Unscrewed ring-cap that secured the broken glass gauge
2. Removed the broken glass, plus the old black plastic backing of the glass gauge
3. Replaced new glass gauge with new black plastic backing
4. Screwed plastic ring-cap that secures the gauge back on
5. Ran test
6. Leaked
7. Found out we threw a
... Read moreway an O-ring that fits at the bottom of the glass gauge.
8. Be advised: don\'t throw away the old O-ring.
Removed the water gauge, using a socket set, removed the faucet., Replaced the socket and gauge. Very simple process specially when the replacement parts fit perfectly. Now I have a fully operational coffee pot instead of buying a new one saving a good amount of money.
My 60 cup coffee urn did not have a water lever gauge and I wanted to add one by ordering ôreplacement partsö I was able to switch out the original spout with the new assembly I ordered and the water gauge. The new spout is designed with a push bar similar to a self serve soda fountain so you can fill you cup one handed just by pressing a
... Read moregainst the lever.
Using an adjustable wrench I unscrewed the nut inside my coffee urn and removed the original spout assembly. Then I assembled the new spout with the gauge tube and attached it to the urn using the same method as removing it. I couldnÆt get it tight enough so my husband did that part. ItÆs so much nicer to know the hot liquid level at a glance now and I donÆt have to remove the lid and filter basket (which can be very hot) to see inside.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
