Troubleshooting
- DeLonghi
- Coffee Maker
- Espresso Machine
Customer Part Reviews
?- < Prev
- 1
- Next >
Questions & Answers
?Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
- < Prev
- 1
- Next >
The on off push button on the Delonghi Magnifica ESAM3300 stopped functioning
Todd from Oakland, California
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
- Parts Used:
- AS00000621
2. Remove the 2 screws from the back of each side panel and slide them both off.
3. Remove the 2 screws holding the back and remove it.
4 Remove the 2 screw from the top and the 2 screws (there are 4 total) from each side of the face plate
5 R ... Read more elease the clip and carefully pull out the ribbon plug from it\'s receptacle in the Main control board.
6 Note the position of the 2 knobs and remove the face plate from the unit and the now loose top. you should be no more than 10-15 minutes into it.
7 Remove the single control board hold down screw and carefully push back the plastic clips one at a time and pry out the control board. This may take a while. A jewelers screwdriver might help. Do not break the plastic clips.
8 Install the new board being careful to align the 2 knob posts with their respective holes. Note the posts have a flat side. Make sure the buttons fit where they belong. Refasten the hold down screw.
9 Reattach the ribbon and plug it in. Test the buttons to make sure they fit in properly and they work. Be careful, don\'t touch the board contacts or electrocute yourself.
10 If it doesn\'t respond, unplug it and remove and refit again . It may take a couple of attempts.
11 Reassemble in reverse order.
DeLonghi Espresso Machine had a bad control board-not responding correctly
Barbara from Folsom, California
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
- Parts Used:
- AS00000621
Orignal control board acting up -- power on button would not work, nor would \"make coffee\" button.
Mark from TALLAHASSEE, Florida
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
- Parts Used:
- AS00000621
I appreciate having the instructions on the e-Replacement Parts.com web site. Those instructions for replacing the control ... Read more board convinced me to purchase a replacement board from e-ReplacementParts.com
Constantly repeating warmup cycle
Gregg from Tampa, Florida
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
- Parts Used:
- AS00000621
2. Removed steam control knob
3. Removed front panel
4. Disconnected ribbon cable from power supply board at rear left of unit
5. Using a small bladed screwdriver, carefully pried the control board loose from 2 of 4 clips holding it in place on the front pan ... Read more el so it could be slipped free of the panel and removed.
6. Placed new board in panel
Connected ribbin cable from new board to power supply board.
7 reassembled coffee maker and brewed an espresso.
Control board was broken and power wouldnGÇÖt turn on.
Gabriel from Los Angeles, California
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
- Parts Used:
- AS00000621
ON-OFF control stopped to work
Bernardo from Houston, Texas
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
- Parts Used:
- AS00000621
Remove front panel
Replace control board
- < Prev
- 1
- Next >
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.