Opened the back of the unit
Operated the unit to track down the leak
Localized the leak to the solenoid valve that serves the cappuccino outlet
Disconnected the hoses feeding the solenoid
Removed and replaced solenoid
Reinstalled hoses and closed up unit
1. Part May look completely different from original.
2. Did not need the extra large O ring provided.
3. Had to take a smaller O ring from old valve.
4. May need some regular type screws to affix plastic part to mount.
5. Connect hoses and attach electric wires.
1. Removed covers (top, 2 sides and rear)
2. Removed all the pipe/hoses connected to valve and heater
3. Removed 2 screws that holds solenoid and water heater bracket
4. Removed Solenoid, which was a little harder because screws were rusted, I just twisted off the screw heads (with a needle nose vise grip).
5. Went
... Read more to hardware store and got some stainless steel screws to fit new solenoid (sorry don\'t remember screw size). Since the new valve is plastic ( old one was brass) I used 2 small stainless sheet metal screws.
6. Replaced all \'O\' rings, and put silicone grease on them (which I already had from a previous repair.
7.Put back together in reverse order.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP12019288
Manufacturer Part Number: 5513225801
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
