It is a genuine item that is supplied directly from the original equipment manufacturer for use with DeLonghi coffee makers. The pump is utilized to supply milk to the frother. Over time components may wear out and it may begin to malfunction or to quit working completely, eventually requiring a replacement. Always check the diagrams of your model and the owners manual before beginning the repair. Keep in mind this high-quality plastic body pump is sold as an individual unit. You will need a screwdriver to take the housing apart in order to perform this repair.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Perfect replacement for old pump
This was a perfect replacement for the old pump in my machine. I could tell by the manufacturer's date that it was about 13 years newer, and it shows. After installing it, along with a new valve, my machine works better than ever. It pulls espresso like new and steams milk so frothy that it stands up on its own on top of the espresso. I thought I was going to need to replace my Delonghi Magnifica, but once again, with help from eReplacement parts, the machine keeps making espresso, and allows me to make my wife her morning latte, after all these years.
Brian - September 17, 2019
Verified Purchase
★★★★★
★★★★★
Part worked great and was an easy repair!
I stumbled upon ereplacementparts when looking for this water pump for a Delonghi Perfecta coffee maker. I was very happy with the selection and level of service. Products shipped fast so I could get my machine back up and working. With a little technical know-how, this is an easy part to swap out. Will definitely be back to ereplacementparts for my part needs in the future.
Guest - October 14, 2019
Verified Purchase
★★★★★
★★★★★
Great part
Great part.My espresso machine is working as new again
Guest - October 18, 2019
Verified Purchase
★★★★★
★★★★★
Expresso coffee maker repair.
The pump was easy to install. The coffee maker works like new.
Guest - October 16, 2020
Verified Purchase
★★★★★
★★★★★
Exact Fit
This worked perfectly in my DeLonghi Magnifica espresso maker. Fast shipping and good customer service. Thanks!
Guest - December 3, 2020
Verified Purchase
★★★★★
★★★★★
Delonghi magnifica xs
Water pump was going out in my delonghi. Looked on the internet for a pump, and found EreplacementParts. Found the part i was looking for very easily. Will use againg for more parts.
Guest - April 8, 2021
Verified Purchase
★★★★★
★★★★★
Espresso Machine Saved by new pump.
Your DeLonghi replacement pump arrived quickly, fit, and works great. We hope to get another 6 yrs of espresso making. :)
Guest - July 29, 2021
Verified Purchase
★★★★★
★★★★★
Great Repair
I replaced the pump and now my espresso machine works like new.
However, shipping is different. I paid $10 for shipping and from the day it was shipped, it took 16 days to get it. I feel that this was an excessive charge for such slow delivery.
Guest - August 10, 2021
Verified Purchase
★★★★★
★★★★★
On time and correct part
Part was exactly what I needed and delivered on time.
Anonymous - October 21, 2021
Verified Purchase
★★★★★
★★★★★
Easy Repair and worked perfectly
Pump arrived and worked as expected. I'm back to making great coffee lol
Vincent - March 3, 2023
Verified Purchase
< Prev
1
2
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Disconnected the power. Removed water from the reservoir. Removed all screws from top and bottom covers. Disconnected the two wires and the two hoses from pump. Removed pump from the mount. Installed the new pump, hoses and wires. Replaced the top and bottom covers. Reinstalled the reservoir and filled with water and tested coffee maker.
... Read more Excellent repair, just like brand new. Good Luck.
1. Removed 3 outer panels
2. Removed 2 electrical wires (quick, slide off disconnects)
3. Removed 2 water pipes (no clamps, just slide on/off)
4. Remove water the pump from rubber holders
5. Reinstall with new pump
Bingo!
1: Turn off remove covers
2: Followed you tube video on replacing pump and gaskets
3: With covers off do a deep cleaning
4: Install covers
5: Run de-calsify cleaning
6: Enjoy coffee time !!!!!
Did you find this story helpful?
Thank you for voting!
No water coming from the Espresso machine due to failure of the pump.
Follow the steps from - https://www.ifixit.com/Guide/De%27Longhi+EC155+Water+Pump+Replacement/52184
With the following differences -
1. Removing the screws requires a special 6-point, star-shaped driver, with a recess to allow for a dimple in the screw
... Read more heads. A standard driver without the recess will not work.
2. The middle unit, holding the heating unit, must be removed from the main case by unfastening two tabs and applying some pressure to release. This will expose the pump unit.
Read less
Did you find this story helpful?
Thank you for voting!
Expresso machine was taking to long to warm up and build water pressure
Removed few screws on the under side cover , and after removed the back panel which can only be removed from inside. Disconnected the two electrical wires to the pump and the water tube. Removed the pump, placed the new pump connected the wires and the water tube, and tested before I closed all the access panels
Below is the model of mine that broke:
MAGNIFICA S AUTOMATIC ESPRESSO MACHINE - ECAM 23.210.B
First, I thought it was the Valve (part #5513227961) because water was still coming out of the cappuccino frothier. I ordered the value through this site and replaced the value. That was a difficult repair. Then, it sounded li
... Read moreke the pump stopped working. I ordered the pump (part #5113211291), replaced it, and the coffee machine worked like new! What I think happened was that the clogged valve put pressure on the pump since the pump would work but was unable to push any water through the machine. I think the pump burnt itself out as a result of the clogged valve. Anyways, I had difficulty finding any parts for my machine (even Delonghi\'s official support site didn\'t have the parts), and am glad eReplacementParts had them in stock! $90 in repairs for a $1,000 espresso machine is waaaaay better than having to purchase a new one or send it out for repair!
Read less
Did you find this story helpful?
Thank you for voting!
Expresso machine would fault no water and get drips into cup
Once you get all the plastic out of the way and use the needle nose to unplug the electrical connections.
1. Remove 2 screws
2. Disconnect two hoses
3. Put new pump in
4. Install two screws
5. Push hoses back on pump
6. Connect wires and put the plastic back on.
The hardest part of the repair on my EAM3400.N Magnifica was reinstalling the upper pump support which i removed initially. In hindsight i should have left the support in place as I had to put it back on with a great deal of effort without the pump in its location. These are the steps I should have followed for this particular machine (If
... Read more the pump support slides out instead of being held in a slot by hard rubber tabs, then you may be able to do this with removing the support and without disassembling the pump).
1. Remove back and sides
2. remove wires from pump
3. remove hoses from pump and valve (make sure not to lose the clips or the o-ring inside the valve for the upper hose.
4. rotate pump as needed to remove screws on the top
5. carefully remove upper part of pump from lower and remove pump from lower support
6. using a 12mm wrench, unscrew valve from upper pump shaft
7. remove small o-ring from old valve and insert in same location in new valve
8. place upper pump shaft through upper pump support
9. fasten valve to upper pump shaft using wrench
10. replace upper pump shaft into pump, making sure to keep all pump parts as they were when you removed the shaft, rotating pump as necessary to tighten screws holding pump shaft onto pump body
11. rotate pump into proper position
12. replace pump hoses, ensuring they are properly seated, reinstall clips where required
13. replace wires on pump.
14. start up machine and run one or two rinse cycles until water flows through machine
15, replace sides and back
Enjoy better espresso and milk frothing than you have had in a long time
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
