Part Location Diagram of 6032107700 DeLonghi Cup Tray
See part 17 in the diagram
( Grid squares measure 1x1 inch )

Cup Tray 6032107700

Manufactured by:
DeLonghi
ERP Number:
ERP10312548
Part Number:
6032107700
Original Equipment Manufacturer ?
  Works with your model  ESAM4400!
$15.95
In Stock
Delivers in 3-5 Business Days!

Easy 

1- 2 hours 

(2 rated repairs) ?
  Works with your model   ESAM4400!

Product Description

?

This is an authentic manufacturer-sourced replacement part which is specifically designed for DeLonghi espresso machines. This metal tray is used to support a cup above the draining tray while espresso is being made. This removable part also features slats which allow excess product to drain away. One item is included per order.

Troubleshooting

This part works with the following brands:
  • DeLonghi
This part works with the following products:
  • Coffee Maker

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

1- 2 hours 

(2 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

full service strip, clean, diagnose and repair

steve from State College, Pennsylvania

6 of 6 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Pliers, Screw drivers
This beautiful bean to cup machine had had a hard life when I picked it up on eBay, but the seller said the machine turned on and warmed up. Critical to a cost effective repair. These things need a deep clean...A complete strip-down..Even when normally working. This machine didn\'t appear to have ever had a clean.

Strip down revealed the big seals on the piston and infuser were choked with old coffee, and had gone brittle.

The final problem was a leaky o ring on the boiler, and a broken clip.
Did you find this story helpful?
Thank you for voting!

It needed a tray placed on the area to put a coffee cup on.

Carri from Manhattan, Kansas

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
6032107700
Placed the tray onto the machine, no tools were needed.
Did you find this story helpful?
Thank you for voting!
  • 1