Part Location Diagram of 5513213761 DeLonghi Tube Ptfe Di2-de4 L=190 2bushe
See part 40 in the diagram
( Grid squares measure 1x1 inch )

Tube Ptfe Di2-de4 L=190 2bushe 5513213761

Manufactured by:
DeLonghi
ERP Number:
ERP10311836
Part Number:
5513213761
Original Equipment Manufacturer ?
  Works with your model  ECAM26455M!
$8.75
In Stock
Delivers in 3-5 Business Days!

A Bit Difficult 

Less than 15 mins 

(1 rated repair) ?
  Works with your model   ECAM26455M!

Troubleshooting

This part works with the following brands:
  • DeLonghi
This part works with the following products:
  • Coffee Maker
  • Espresso Machine
Part# 5513213761 replaces these:
5532118100,

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

Less than 15 mins 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Delonghi Majestica - water leak at pump distribution valve

William from Centennial, Colorado

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Parts Used:
5513213761
1. Remove side and back panels from enclosure (6 screws)
2. On pulse pump assembly, at the top of the valve, find and remove the spring clip retainer securing ptfe tube to valve. Use long-nose pliers to grip and pull spring clip from the retainer holes. Remove the ptfe tube from the pump valve,
NOTE: Carefully remove the sma ll red o-ring from inside the valve socket and examine condition. Replace if needed. If the o-ring is not visibly damaged but simply \"loose\" when installed on the ptfe tube, just set it aside for re-installation later.. * BUT DON\'T LOSE THIS! *
3. On the steam generator, locate the heat protective tubing covering the ptfe tube, slide tube away from the generator to expose the ptfe tube end and spring retainer. Using a pair of long-nose pliers, remove the spring clip from retainer, and pull the ptfe tubing from the steam generator .
NOTE: Carefully remove the red o-ring from inside the recessed socket in the steam generator. Install this o-ring over one end of the new ptfe tube.
3.Install the new ptfe tube with o-ring installed, into steam generator receptacle, pressing securely to assure \'seat\'. Re-install spring clip in its retainer holes. Slide the heat protective tubing back over the ptf tube connection.
4. Install the o-ring removed earlier to the end of the ptfe tube, and carefully insert the tube and o-ring into the pump valve receptacle. Re-install the spring clip in its retainer holes.
5. Test operation and reassemble sides and back.

Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP10311836
Manufacturer Part Number: 5513213761
Brand Model Number Description
DeLonghi EAM3200 Coffee Maker - Magnifica
DeLonghi EAM4000B Coffee Maker - Magnifica
DeLonghi EC460 Coffee Maker - Cappuccino Maker
DeLonghi EC9255M Espresso Machine - Espresso (0132126086) Ver: Ca, Us
DeLonghi ECAM26455M Espresso Machine - Fully Automatic - 132215147 - Ca Us
DeLonghi EN670B Coffee Maker - Nespressor Coffee Maker
DeLonghi EN680M Coffee Maker - Metal Nespresso
DeLonghi ESAM2000 Espresso Machine - Fully Automatic - 132212063 - Ca Us