Instructions for the RotoFry model with rotating basket.
On the bottom there are 5 security torx screws, 4 Phillips screws and two 9mm nuts that need to be removed. Then the bottom part can be lifted up. To completely remove, you will need to disassemble the magnetic power receptacle and slide it through the opening in the bo
... Read morettom part.
Before ordering I measured the heating element to see whether there was some non zero resistance (if I remember correctly it was 200 ohms). So I guessed that it was ok. Then I noticed the TCO attached with a nut to the bottom of the pot. I disconnected the spade connector on one end of the wire it was connected to and measured continuity across the TCO, but there was none.
To remove the TCO, unscrew the nut that is holding it and slide the protective tubing off. TCO is crimped on to the wire on both ends. Cut the old TCO out, strip wires and crimp the new TCO on.
Reassemble.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10310291
Manufacturer Part Number: 511816
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.