This part is manufactured by Andis. This Hinge Assembly is used on many models of Andis hair clippers. The Hinge Assembly includes the Blade Lock (part number 64537). This part holds the cutting blades into place while cutting hair. If the blade feels loose or won't stay in place, then the Hinge Assembly needs to be replaced. To replace this part two Blade Hinge Screws (27864) will need to be removed. A Philips screwdriver is all that is needed for the replacement of this part.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Just what I needed
I love how organized and easy to use this site is, I ordered two new pieces for my clipper and they are both exactly what I needed, both arrived sooner than expected and in great shape and functionality. Couldn’t have been more convenient! Thank you thank you thank you!
Guest - September 24, 2020
Verified Purchase
★★★★★
★★★★★
Quick & easy !
The person I talked to was very nice & knew her job & just what parts I wanted.
Guest - February 23, 2021
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
I had two used Andis clippers I purchased on craigslist a few months ago. I removed screws, opened clippers case; Removed the old parts - cleaned out lint and hair; replaced the old with the new parts; placed case parts together, re-tightened screws plugged in and tested. Fantastic- blades stay in place, cut well and run quiet Woo hoo!
1. Removed two screws holding the latch.
2. Observed the order and orientation of parts.
3. Replaced in same order and orientation with two screws, but with new latch.
4. Put blade on hinge, closed blade.
5. Checked latch function.
6. Shaved poodle\'s face.
7. High fived poodle. No, not really.
... Read more Note: They call it a hinge, but it\'s more like a latch.
Read less
Did you find this story helpful?
Thank you for voting!
Blade would not stay tight against head of clippers
If the hinge spring is broken, you will find that the blade will not be pulled down toward the blade drive. This lack of tension can cause the blade to fall off. Remove 2 screws that hold the hinge on. Make a note of the orientation of the steel spacer under the hinge, then remove and discard the old hinge. Keep the steel spacer in place,
... Read more and attach the new hinge with 2 screws. Don\'t over-tighten! All done!
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP12006744
Manufacturer Part Number: S63897
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
