- This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
- New stock is on the way! On order parts usually ship within 7 business days.
- Item is not in stock and usually ships 10-15 business days from the time you place your order.
- This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
Jump to:
Product Description
?Genuine Manufacturer Approved replacement part used on Skil Saws. This part is made out of Plastic and it includes both sides of the Housing. Please note Screws used to attach it are sold separately. Torx T25 screwdriver is needed for repair. • Make sure to unplug you tool before starting the repair • First you want to remove all the handle screws • Then you will be able to separate Two Halves of the Handle • Remove Switch and Cord Clamp from the Handle • Replace the Old Handle with the New handle • Secure the Switch and Cord Clamp in the handle • Reassemble the Handle using the Screws
Frequently Purchased Together
?Troubleshooting
- Skil
- Circular Saw
- Saw
Customer Part Reviews
?- < Prev
- 1
- Next >
Questions & Answers
?Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
- < Prev
- 1
- 2
- Next >
Broken top handle, broker trigger handle, and broken switch
Cesar from Kings Beach, California
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
- Parts Used:
- 1619X08724, 3129160001, 2825656001
Broken handle on my circular worm drive skill saw
Rick from GREEN VALLEY, Arizona
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
- Parts Used:
- 2825656001
Dropped saw off ladder and broke both handles.
Brandon from Tujunga , California
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
- Parts Used:
- 4810003233, 3129160001, 2825656001
Saw fell off sawhorse breaking handle.
Dennis from YREKA, California
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
- Parts Used:
- 2825656001
Took picture of wiring (just in case)
Removed left side of handle being very careful to hold wiring and \'trigger\' switch in place.
Attached left side of new handle and reinserted wiring and switch.
Installed right side of handle carefully tucking in wiring.
Handle was cracked, two screws missing.
Timm from Enterprise, Oregon
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
- Parts Used:
- 5610324001, 2825656001
The repair was simple and went fine. Parts all fit like new. The old Skilsaw lives again!
Broke both handles
Jim from Lees Summit, Missouri
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Parts Used:
- 3129160001, 2825656001
Removed the pistol grip operator handle. Routed the wires in the new handle. Placed the two side together and installed the 4 Tork screws, then secured the handle to the saw with the remaining 4 Tork screws.
Crushed pistol grip
Charlie from Gallatin Gateway, Montana
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
- Parts Used:
- 2825656001
Broken handle
Mike from Bridgton , Maine
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
- Parts Used:
- 2825656001
Handle and switch were broken from falling, and power cord was damaged
David from Boulder, Colorado
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
- Parts Used:
- 1619X08724, 2825656001
Saw was dropped and fractured handles
Gary from Highland Charter Township, Michigan
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Socket set
- Parts Used:
- 4810003233, 3129140001, 2825656001, 1619X01423
- < Prev
- 1
- 2
- Next >
Model Cross Reference
Manufacturer Part Number: 2825656001
| Brand | Model Number | Description |
|---|---|---|
| Skil | HD77M-22 | Saw - Skil Hd77m-22-(F012hm7702) Parts |
| Skil | SHD77M-72 | Saw - Skil Shd77m-72 Parts |
| Skil | SPT70WM-01 | Saw - Saw 10-1/4 In. Magnesium Quatch Worm Drive Saw; Saw Blade |
| Skil | SPT70WM-22 | Circular Saw - 10-1/4 In. Magnesium Worm Drive Skilsaw |
| Skil | SPT70WM-71 | Circular Saw - 10-1/4 In. Magnesium Worm Drive Skil With Twist Lock |
| Skil | SPT70WM-72 | Circular Saw - 10-1/4 In. Magnesium Worm Drive Skilsaw |
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.