This is an authentic part that is supplied directly from the original equipment manufacturer for DeWALT circular saws. The cord protector is used to protect the power cord from getting damaged. To install the cord protector, simply push the power cord in place through the cord protector. This part is made of rubber and is sold individually.
Troubleshooting
This part works with the following brands:
DeWALT
This part works with the following products:
Circular Saw
Angle Grinder
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Removed the six screws that secure handle halves together,,,,with flat blade screwdriver gently pried one half of handle off,,removed the two screws that secure cord to handle and one screw that holds switch in place,,,removed the screws that hold wires of cord to switch and also the green ground wire,,,removed the old cord protector an
... Read mored slipped the new one on along with the shock absorber,,,reattached the wires back on the switch and secured the green ground wire to body of saw,,reattached the two screws that secure cord to handle and the one screw that holds switch in place,,,attached the handle halves together with the six screws,,,job completed!!! the only thing to be sure to do is to make sure wires are routed on the slots in handle that are there just for that purpose,,,
Removed all the screws holding handle assembly together, then removed the pinch bracket that locks cord in place,,removed the screw that hold switch in place,,disconnected the three wires from the old power cord,,placed the new strain relief on new cord, cut the new cord wires to proper length,,crimped on new terminals, connected black an
... Read mored white wire to switch and green ground wire to saw ground terminal,,replaced the switch back in handle, fitted the handle halves together with screws,,done!!!
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_2.gif "Part Location Diagram of N046062 DeWALT Cord Protector")
_WW_2.gif "Part Location Diagram of N046062 DeWALT Cord Protector")
