This is a genuine manufacturer approved replacement switch that is specially made for Bosch and Skil circular saws. It is the part of the tool that allows user to turn it on and off. Because switches have mechanical parts, over time the may wear out and begin to fail eventually requiring replacement. This durable plastic switch is sold individually.
Troubleshooting
This part works with the following brands:
Bosch
Skil
This part works with the following products:
Circular Saw
Saw
Part# 3132421028 replaces these:
2610321606,
★
Customer Part Reviews
?
4.8
Average Rating (out of 5):
★★★★★
★★★★★
(5 Reviews)
Click to filter by ratings:
5 stars
4
4 stars
1
3 stars
0
2 stars
0
1 star
0
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Just what I needed
Exact replacement for my Bosch circular saw. Perfect. Glad eReplacementparts had it in stock, another website had it on back order. Delivery was quick, too!
Scott - November 19, 2019
Verified Purchase
★★★★★
★★★★★
great part/ worked as expected
Part arrived in a timely manner and was an exact replacement. Worked perfectly. Thanks
David - February 11, 2020
Verified Purchase
★★★★★
★★★★★
Worked as expected
Package came on time, well packaged, saw is working fine now. Recommended
Guest - February 24, 2021
Verified Purchase
★★★★★
★★★★★
Sander switch
Trigger switch for Skil belt sander - part fit and works! Salvaged a fine sander. Thanks!
Guest - August 18, 2021
Verified Purchase
★★★★★
★★★★★
A NEW switch
Arrived fairly quickly, albeit what I felt excessive cost for S&H for such a small, lightweight part. It did fit the old circular saw correctly & has restored the use of said saw @ a "lower cost" than that of a new machine.
Anthony - May 1, 2019
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Removed one half of the handle
Removed the switch from the handle
Made a wiring diagram
Removed the wires from the old switch
Connected the wires to the new switch
Screwed the new switch to the handle
Installed the handle half
Did you find this story helpful?
Thank you for voting!
When the saw was plugged in it started up by itself.
Take handle apart exposing the switch. Make a wiring diagram, then remove the wires from the old switch, then install them in the new switch. Replace and put handle back together , no special instructions needed .
1. Remove handle half.*
2. Remove old switch & cut it free from service & load sides of switch (4 wires, noting polarity of all)
3. *Check(ed) for broken wire @ strain relief area BEFORE I ordered switch, so now I needed to correct the length of the internal wire run in handle from male plug.
4. Connected new switch.
... Read more />5. Re-assembled the handle.
6. Tested tool.
Read less
Did you find this story helpful?
Thank you for voting!
ON/OFF SWITCH IN HANDLE WENT BAD. SAW STAYED ON ALL THE TIME
REMOVED THE SCREWS TO SEPARATE THE HANDLE, BOSCH HAD GREAT IDEA OF MAKING THE SWITCH SECTION OF THE HANDLE REMOVABLE BY ITSELF. REMOVED RETAINING SCREW AND MARKED THE WIRES. USED PLIERS TO CRACK AND OPEN OLD SWITCH TO REMOVE THE WIRES TO SAVE ALL THE LENGTH TO KEEP FROM HAVING TO ADD ON WIRE. THAT WORKED GREAT. FASTENED WIRES TO NE
... Read moreW SWITCH AND REINSTALLED IT IN THE HANDLE WITH THE RETAINING SCREW. REASSEMBLED THE HANDLE SECTION WITH THE SCREWS. ALL WORKED GREAT. THANKS FOR THE EXCELLENT REPLACEMENT SWITCH.
Removed torx screw in handle. Remove screws securing wire leads on old switch. installed new switch and reassembled handle. Switch was identical match for my 35 year old skill saw.
Did you find this story helpful?
Thank you for voting!
The switch to my Bosch circular saw needed failed and needed replacing.
1. Removed half of the handle from the body of the saw (slotted screw heads thus straight blade screw driver)
2. Removed the switch from the handle housing two small screws phillips head If I\'m not mistaken.
3. Removed the four wires from the bad switch used needle nose pliers and simply pulled the wire out similar to the ba
... Read moreck of an electrical outlet where the wire is inserted and removed from a small hole with a spring clamp
4. Cleaned the tool as best I could while it was open.
5. Installed the existing wires to the new switch using the phillips screws provided with new switch also provided was a wiring diagram in the case you did not pa attention to how the wires came off the old switch.
6. Installed the removed half of handle housing and used my saw!
Thanks for the prompt delivery and the part.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP17016162
Manufacturer Part Number: 3132421028
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
