This durable power cord is an authentic OEM sourced directly from DeWalt for use with circular saws. The cord is hardwired to the tool in order to supply power from a standard U.S. outlet. If the cord is damaged it is important to replace it before continuing to use the tool. Please note this high-quality rubber insulated power cord is sold individually.
Troubleshooting
This part works with the following brands:
Black and Decker
Porter Cable
This part works with the following products:
Circular Saw
Part# 90578994-26 replaces these:
90578994-26, P90578994-26,
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1) Unscrew and remove the handle/trigger housing cover.
2) Disconnect and remove power cord.
3) Install new power and reconnect.
4) Replace handle/trigger housing cover.
1.Removed 2 screws from side cover.
2. Removed 2 screws that held cord in place.
3. Removed old switch, cord and cord protector.
4. Slid new switch in place.
5. Installed new cord and protector.
6. Installed cord clamp with 2 screws.
7. Wired new cord to switch using wire nuts.
8. Reinstalled s
... Read moreide cover.
I unscrewed half of the case covering the old cord, undid four internal screws, removed the old cord, slipped the rubber protector off of the old cord and slipped on the new one. Then, reversed the process.Plugged the saw into an outlet and tested. It ran great!
Did you find this story helpful?
Thank you for voting!
missing parts that needed to be installed, and cord needed replacing
I installed the missing parts in order
1) screw on inner flange
2) put blade on
3) slide on the clamp
4) screw in the bolt hand tight
5) attach vise-grips so blade does not move, tighten bolt using adjustable wrench
For cord replacement
1) take off plastic covers using Phillips screwdriv
... Read moreer
2) take of old cord and attach new one to appropriate positive and negative sides
3) put plastic covers back on
my saw looked and worked like brand new
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10185614
Manufacturer Part Number: 90578994-26
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
