Part Location Diagram of E100000030 Echo Fan-blower
See part E15 in the diagram
( Grid squares measure 1x1 inch )

Fan-blower E100000030

Manufactured by:
Echo
ERP Number:
ERP9190487
Part Number:
E100000030
Original Equipment Manufacturer ?
  Works with your model  ES-230!
$22.30
In Stock
Delivers in 3-5 Business Days!

Easy 

Less than 15 mins 

(2 rated repairs) ?
  Works with your model   ES-230!

Product Description

?

This is an authentic Echo replacement part, sourced from the original manufacturer for use with gas-powered blowers. The plastic fan fits inside the blower housing and is driven by the output shaft to create the wind that is sent through the tubes. This item is available as an individual replacement part.

Troubleshooting

This part works with the following brands:
  • Echo
This part works with the following products:
  • Chipper Shredder

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

Less than 15 mins 

(2 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

fractured fan/vac housing

french from SAN LUIS OBISPO, California

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
Parts Used:
E100000030
disassemble fan/vac front/outside housing
remove safety switch & wiring
remove fan blade
clean with brush & compressor
install fan blade
install safety switch & wiring
install & secure new fan/vac housing
spent 10% of the cost of a new vac/blower on needed parts
up and running like it was ne w
Did you find this story helpful?
Thank you for voting!

Fan blades where broken off in places.

tom from sutter creek, California

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Socket set
Parts Used:
E100000030
Very easy repair on the Echo es 231 shredder/ blower. Unscrew the cover, use a socket and pliers to hold blade. Then remove the fan. Put a little bit of blue loctite on the bolt. Install the cover.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP9190487
Manufacturer Part Number: E100000030
Brand Model Number Description
Echo ES-230 Chipper Shredder - Shred &#39N&#39 Vac
Echo ES-231 Chipper Shredder - Shred &#39N&#39 Vac