Screw 530015780

1. Took off the top engine cover and starter rope with cover.
2. I unscrewed the screws holding the old primer bulb to the housing and took the bulb off and removed the old fuel lines.
3. Removed the nuts holding the air filter housing in place and pulled the housing off.
4. I pulled the carburetor out that sets behind t ... Read more he air filter and removed throttle linkage and fuel lines from the carburetor.
5. Removed rotten fuel lines outside and inside fuel tank with fuel filter.
6. I cut the fuel lines at a sharp angle and placed them though the appropriate holes going into the fuel tank. I used a long pair of needle nosed pliers to pull the back line through and out the tank so that I could put the fuel filter on.
7. Last I over hauled the carburetor and from that point put everything back on in reverse order.