Jump to:
Product Description
?This is an authentic OEM part for use with Husqvarna Chainsaws. The clutch connects to the crankshaft and engages the clutch drum to spin the chain. The most common reasons for replacing the clutch are when the chain does not turn, won't stop turning, or does not cut properly. This part is sold individually. The tool that you will need to replace the clutch is a 13mm socket, large flat-head screwdriver, and a hammer.
Frequently Purchased Together
?Troubleshooting
- Husqvarna
- Jonsered
- RedMax
- Chainsaw
Videos For installing this part.
?
Customer Part Reviews
?- < Prev
- 1
- Next >
Questions & Answers
?Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
- < Prev
- 1
- Next >
Worn clutch/ clutch drum
ben from norwich, New York
Clutch wore out. Needed new air cleaner. Chain brake handle and spring broke.
Tim from Delta Junction, Alaska
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers, Socket set
- Parts Used:
- 537110503
2-Pull spark plug out and insert small rope doubled up into plug hole (to hold piston from moving while removing clutch).
3-Install clutch removal tool on clutch (which has a 19mm nut) and remove clutch turning it direction of off arrow.
4-Pull clutch and drum off remove b ... Read more earing and clean up clutch and oil pump area.
5-Reinstall bearing with new grease and drum with sprocket.
6- Reinstall clutch
7-Reinstall chain and bar and cover.
8-Pull rope out of plug hole and replace spark plug.
New chain break handle
1- remove chain cover.
2-remove two screwÆs ( 4mm Allen wrench) and remove handle.
3- install new chain break handle with screws and put chain cover back on.
- < Prev
- 1
- Next >
Model Cross Reference
Manufacturer Part Number: 537110503
| Brand | Model Number | Description |
|---|---|---|
| Jonsered | 2141 | Chainsaw - Chain Saw |
| Jonsered | 2145 | Chainsaw - Chain Saw |
| Jonsered | 2149 | Chainsaw - Chain Saw |
| Jonsered | 2150 | Chainsaw - Chain Saw |
| Husqvarna | 340 | Chainsaw - Chainsaw |
| Husqvarna | 340E | Chainsaw - Chainsaw |
| Husqvarna | 340EPA | Chainsaw - Chainsaw |
| Husqvarna | 345 | Chainsaw - Chainsaw |
| Husqvarna | 345E | Chainsaw - Chainsaw |
| Husqvarna | 345EPA | Chainsaw - Chainsaw |
| Husqvarna | 346 | Chainsaw - Chainsaw |
| Husqvarna | 346XP | Chainsaw - Chainsaw |
| Husqvarna | 346XPEPA | Chainsaw - Husqvarna Chainsaw Model 346XPEPA Parts |
| Husqvarna | 350 | Chainsaw - Chainsaw |
| Husqvarna | 350EPA | Chainsaw - Chainsaw |
| Husqvarna | 351 | Chainsaw - Chainsaw |
| Husqvarna | 351EPA | Chainsaw - Chainsaw |
| Husqvarna | 353 | Chainsaw - Chainsaw |
| Husqvarna | 353-353G | Chainsaw - 353 / 353g / 353e-Tech / 353g E-Tech |
| Husqvarna | 353EPA | Chainsaw - Chainsaw |
| Husqvarna | 445 | Chainsaw - Chainsaw |
| Husqvarna | 445E | Chainsaw - Chainsaw |
| Husqvarna | 445EII | Chainsaw - Chain Saw |
| Husqvarna | 445II | Chainsaw - Chain Saw |
| Husqvarna | 450 | Chainsaw - Chainsaw |
| Husqvarna | 450E | Chainsaw - Chainsaw |
| Husqvarna | 450EII | Chainsaw - Chain Saw |
| Husqvarna | 450II | Chainsaw - 450 Ii - 450ii (450 Rancherii) |
| Husqvarna | 450RANCHER | Chainsaw - Chainsaw |
| Husqvarna | 450RANCHERII | Chainsaw - Chainsaw |
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.