Part Location Diagram of 537201901 Husqvarna Starter Pulley
See part O-506 01 64-01 in the diagram
( Grid squares measure 1x1 inch )

Starter Pulley 537201901

Manufactured by:
Husqvarna
ERP Number:
ERP9022593
Part Number:
537201901
Original Equipment Manufacturer ?
  Works with your model  CS2135T!
$33.96
In Stock
Delivers in 3-5 Business Days!

A Bit Difficult 

30 - 60 mins 

(1 rated repair) ?
  Works with your model   CS2135T!

Product Description

?

This is a genuine Poulan, Husqvarna and Jonsered part for use with Chainsaws.The Recoil starter pulley spins the flywheel to start the engine. This part is sold individually. The most common reason for replacing the starter pulley is when it is broken or stuck, causing the rope to not rewind and the engine to not start. The tools that you will need to replace the starter pulley are a Torx head screwdriver and needle-nose pliers.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Husqvarna
  • Jonsered
This part works with the following products:
  • Chainsaw
  • Brush Cutter
Part# 537201901 replaces these:
506016401, 537201901,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

30 - 60 mins 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Starter puller was simply worn out and when I removed it of course the starter spring unwound. Starter rope worn but not broken

Kenneth from Nashville, North Carolina

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Parts Used:
505305125, 537201901, 503413201
Rewound spring in my hand rather than on saw. Installed spring and cover. Rope on pulley then reverse wound pulley to allow it to wind rope.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP9022593
Manufacturer Part Number: 537201901
Brand Model Number Description
Jonsered 2041 Chainsaw - Chain Saw
Jonsered 2045 Chainsaw - Chain Saw
Jonsered 2050 Chainsaw - Chain Saw
Husqvarna 240 Brush Cutter - 240, 20010100001-Current
Husqvarna 240EPA Brush Cutter - Brushcutter
Husqvarna 240F Brush Cutter - Brushcutter
Husqvarna 240R Brush Cutter - Brushcutter
Husqvarna 240REPA Brush Cutter - Brushcutter
Husqvarna 245 Brush Cutter - Brushcutter
Husqvarna 245EPA Brush Cutter - Brushcutter
Husqvarna 245R Brush Cutter - Brushcutter
Husqvarna 245REPA Brush Cutter - Brushcutter
Husqvarna 245RX Brush Cutter - Brushcutter
Husqvarna 245RXEPA Brush Cutter - Brushcutter
Husqvarna 333 Chainsaw - Japan
Husqvarna 334T Chainsaw - Chainsaw
Husqvarna 335XPT Chainsaw - Chainsaw
Husqvarna 336 Chainsaw - Chainsaw
Husqvarna 338XPT Chainsaw - Chainsaw
Husqvarna 339XP Chainsaw - Chainsaw
Husqvarna 339XPT Chainsaw - Chainsaw
Husqvarna 365 Chainsaw - 365
Husqvarna 40 Chainsaw - Chainsaw
Husqvarna 45 Chainsaw - Chainsaw
Husqvarna 49 Chainsaw - Chainsaw
Husqvarna 49EPA Chainsaw - Chainsaw
Jonsered CS2135T Chainsaw - Chain Saw
Jonsered CS2139T Chainsaw - Chain Saw
Jonsered GR41 Brush Cutter - Brushcutter
Jonsered GR41EPA Brush Cutter - Brushcutter