8996069-1-M-Husqvarna-503260205-Sealing Ring

( Grid squares measure 1x1 inch )

8996069-1-S-Husqvarna-503260205-Sealing Ring

8996069-2-S-Husqvarna-503260205-Sealing Ring

Sealing Ring 503260205

Manufactured by:: Husqvarna
ERP Number:: ERP8996069
Part Number:: 503260205

Works with your model CS2186EPA!

$17.92

Delivers in 3-5 Business Days!

A Bit Difficult

1- 2 hours

(1 rated repair) ?

Works with your model CS2186EPA!

Jump to:

Description Troubleshooting Questions & Answers Repair Instructions Model Cross Reference

Product Description

This is an authentic replacement part manufactured for use with Husqvarna chainsaws and power cutter saws. The special sealing ring is commonly used to seal the connection between the crankshaft and the case cover. This sealing ring is available as an individual replacement part, please see model diagram for associative parts.

Troubleshooting

This part works with the following brands:

Husqvarna
Jonsered

This part works with the following products:

Chainsaw
Concrete Saw
Circular Saw

Part# 503260205 replaces these:

503260205,

Questions & Answers

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult

1- 2 hours

(1 rated repair) ?

< Prev
1
Next >

Sort by:

Leaky crankcase seals .

Edward from Saugerties, New York

1 person found this instruction helpful.

Difficulty Level:: A Bit Difficult
Total Repair Time:: 1- 2 hours
Tools:: Nutdriver, Pliers, Screw drivers, Socket set
Parts Used:: 503260205

Removed covers . Removed flywheel nut and starter pawls . Removed flywheel using pawl screw holes to fasten puller to remove flywheel . Removed seals with modified screwdriver ( found illustration on Youtube . ) Installed new seal using a socket of the correct size . When removing old seal note how deep they were set so you don\'t pu ... Read more

Read less

Did you find this story helpful?

< Prev
1
Next >

Model Cross Reference

This part works with the following models:

ERP Number: ERP8996069
Manufacturer Part Number: 503260205

Brand	Model Number	Description
Husqvarna	181	Chainsaw - Chainsaw
Jonsered	2094	Chainsaw - Chain Saw
Jonsered	2095	Chainsaw - Chain Saw
Husqvarna	2100	Chainsaw - Chainsaw
Husqvarna	2101	Chainsaw - Chainsaw
Husqvarna	281	Chainsaw - Chainsaw
Husqvarna	281XP	Chainsaw - Chainsaw
Husqvarna	285	Chainsaw - Chainsaw
Husqvarna	288	Chainsaw - Chainsaw
Husqvarna	288EPA	Chainsaw - Chainsaw
Husqvarna	288XP	Chainsaw - Chain Saw
Husqvarna	298	Chainsaw - Chainsaw
Husqvarna	3120	Chainsaw - Chainsaw
Husqvarna	3120EPA	Chainsaw - Chainsaw
Husqvarna	3120K	Concrete Saw - Power Cutter
Husqvarna	3120XP	Chainsaw - Chainsaw
Husqvarna	3120XP-3120XPEPA	Chainsaw - 3120 Xp - 3120 Xp Epa (20180900001-20182200000)
Husqvarna	3120XPEPA	Chainsaw - Husqvarna Chainsaw Model 3120XPEPA Parts
Husqvarna	3122K	Concrete Saw - Power Cutter
Husqvarna	385	Chainsaw - 385 (Epa) (2005-03)
Husqvarna	385EPA	Chainsaw - Chainsaw
Husqvarna	385XP	Chainsaw - Chainsaw
Husqvarna	385XPEPA	Chainsaw - 385 Xp Epa, 20051000001-20063999999
Husqvarna	390	Chainsaw - Chain Saw
Husqvarna	390,390EPA	Chainsaw - Chain Saw
Husqvarna	390EPA	Chainsaw - Chainsaw
Husqvarna	390XP	Chainsaw - From Chain Saw
Husqvarna	390XP-390XPG	Chainsaw - 390 Xp® / 390 Xp® G / 390 Xp® W / 390 Xp® Gw
Husqvarna	390XP-XPG-XPW	Chainsaw - Chainsaw
Husqvarna	390XP/	Chainsaw - 390xp/Xpg/Xpw (20064100001-20101900001)