Genuine Husqvarna replacement part, this item is sold individually. This part is used on all of the Husqvarna Chainsaws listed below. The purpose of this nut is to attach the Clutch Cover along with the Chainsaw bar.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Always pleased with my purchases here.
ereplacementparts always has what I need. I used to go to the department store for parts but not anymore. They always have what I need.
William - May 14, 2019
Verified Purchase
★★★★★
★★★★★
Happy to have this as a backup
Every time I’ve tried to contact you guys I get a person on the line immediately, and they’ve always been super helpful! I appreciate y’all!
Guest - November 28, 2019
Verified Purchase
★★★★★
★★★★★
Flang nut
Easy order fit like It's supposed to
Guest - April 23, 2020
Verified Purchase
★★★★★
★★★★★
Fit perfectly
The parts I ordered fit perfectly, and put my chainsaw, that I’ve had for 25 yrs, back in running condition, thanks
Guest - May 26, 2020
Verified Purchase
★★★★★
★★★★★
Fast shipping
Lost a nut from the housing of my chainsaw. Nothing available locally. Ordered it here and received it within a few days. And of course it's the correct part.
Guest - December 8, 2020
Verified Purchase
★★★★★
★★★★★
Chainsaw nut
The nut was exactly what I needed. Thank you Tom
Guest - April 28, 2021
Verified Purchase
★★★★★
★★★★★
relacement nut
fit was perfect as new
Guest - July 20, 2021
Verified Purchase
★★★★★
★★★★★
Flange nut
The most amazing flange nut ever. Easy to order, easy to install, fit flawlessly. So satisfying. Will order again. Did I mention how amazing it was?
Guest - November 22, 2022
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1. I determined the motor itself was fine by removing the side cover and bar/blade and running the chainsaw.
2. I removed the old side cover which appeared to have excessive wear in a few areas.
3. I put on the bar and chain and fitted the new cover in place.
4. I adjusted the tightness of the blade and made sure the cha
... Read morein oil reservoir was full.
5. I started the chainsaw and it ran normally.
removed cover, removed retainer, one screw, removed broken part replaced with new parts.reinstalled retainer and cover. put bar and chain back on saw,replaced flange nuts with new ones. worked well last long time,maybe.
Simply replaced the parts. I have ordered parts from you before for other saw repairs that weren\'t quite as easy as these. But these repairs were easy because I was able to get exactly what I needed from you. No telling how long it would have taken me to go out on my own looking for these parts. Your website and parts diagrams make i
... Read moret easy to do repairs even if you\'re not \"mechanically inclined\".
Tim
Richmond VA
Read less
Did you find this story helpful?
Thank you for voting!
Flange nuts missing, chain broken and saw returned from friend dirty and missing nuts.
Thoroughly cleaned saw. Replaced chain, properly adjusted chain tensioner, put on clutch/chain break cover and put on new flange nuts. Saw, 1983 Husqvarna Rancher 50 now works fine. Thanks for help with identifying and confirming needed parts.
Jim C
Made sure I had spark and good compression. Then tore apart carburetor and thoroughly clean all ports. Got the power head running , ordered missing parts and assembled. Piece of cake.
Did you find this story helpful?
Thank you for voting!
Lost screw that holds tension on chain saw bar, nut and flange nut.
1. Removed bar and chain
2. Removed protective plate covering where the adjustment screw was located
3. Installed new screw with new nut to hold the adjustment screw in place
4. Installed protective plate covering adjustment screw
5. Reinstalled chair bar and chain
6. Reinstalled cover with new flange nut tha
... Read moret was lost also.
Found it on ereplacement parts and stuck it back on there.
I like ereplacementparts.com because I can go right to what I need and have it shipped to my door.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_3.gif "Part Location Diagram of 503220001 Husqvarna Flange Nut")
_WW_3.gif "Part Location Diagram of 503220001 Husqvarna Flange Nut")
