This is an authentic OEM sourced replacement part designed for use with Husqvarna chainsaws. If the chainsaw bar doesn't adjust when you turn the tension screw usually the tension gear/pin or the adjustment bolt is worn or damaged. This part is made out of metal and it is sold individually. To complete this repair you would need a screwdriver.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Simple part easy repair
Sometimes, the simplest items are the toughest to get right, they did a great job in getting this to me and it came a day early
Thank You
PM- New Jersey
Guest - May 15, 2019
Verified Purchase
★★★★★
★★★★★
Chainsaw partz....
Ordered the correct parts and in a day or two the right partz arrived...great job...
Guest - May 18, 2021
Verified Purchase
★★★★★
★★★★★
You guys have always been easy to deal with on-line and fast in deliveries. It has been a great place to find parts for my Husqvarna chain saw that is so old many places no longer carry the parts
see above I wrote my comments in the title box
Guest - July 12, 2022
Verified Purchase
★★★★★
★★★★★
wrong product ordered
nothing wrong with product, talked to customer service to verify this is what i needed before purchase. completely wrong. do your own research!!!!!!
Guest - May 11, 2022
Verified Purchase
May 11, 2022
Thank you for your review. I?m sorry to hear that happened, we will be in touch soon to help fix this issue.
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
The actual replacement of the parts was pretty simple but had to remove the clutch assembly to get to it. After researching how to remove clutch on that model, which wasn\'t to simple, (I\'m not a mechanic), everything else went smoothly. It takes an impact tool to remove the clutch. Had to put some rope in the spark plug hole to jam the
... Read more cylinder to keep it from turning. Found a youtube video on removing that clutch which was very helpful.
It\'s important to note that the plastic or nylon nut must be threaded completely down to the head of the screw where there is a groove for it. Without that plastic nut, the screw could loosen up during use and fall out. Likely why mine went missing to start with.
The saw is an old model but runs good. Glad to be able to find parts for it to keep it going. New saws aren\'t cheap.
Read less
Did you find this story helpful?
Thank you for voting!
Saw chain was loose, screw broke, could not tighten chain.
1. Remove the chain cover.
2. Remove the chain and the bar.
3. Remove the oiler cover plate.
4. Remove the old pawl.
5. Install the new pawl, the screw, and the nut.
6. Reassemble and adjust the chain tension.
Removed clutch cover, charm and bar. Loosened hex nut on stainless steel tensioner cover. Clutch didnGÇÖt need to be removed. Removed old screw and pawl. Nut was already missing. Threaded new nut onto screw all the way to the head end where it fit into recess in the screw. Threaded pawl onto screw part way. Retightened hex screw. Bar chai
... Read moren and clutch cover reinstalled and back in business.
1. Removed the cover.
2. Removed the chainsaw chain and blade.
3. Partially remove the rear mount just enough to get the pawl out.
4. Reverse the steps and adjust the tension.
Did you find this story helpful?
Thank you for voting!
the old pawl broke so i just replaced all parts that were involved
removed bar and chain cover, bar and chain and chain guard plate. replaced pawl, screw and nut, reinstalled chain guard plate bar, chain and bar and chain cover
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP8985240
Manufacturer Part Number: 501454101
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_4.gif "Part Location Diagram of 501454101 Husqvarna Chainsaw Pawl")
_WW_4.gif "Part Location Diagram of 501454101 Husqvarna Chainsaw Pawl")
