Part Location Diagram of 501426502 Husqvarna Fuel Hose
See part M-7 in the diagram
( Grid squares measure 1x1 inch )

Fuel Hose 501426502

Manufactured by:
Husqvarna
ERP Number:
ERP8985231
Part Number:
501426502
Original Equipment Manufacturer ?
$18.56
In Stock
Delivers in 3-5 Business Days!

A Bit Difficult 

30 - 60 mins 

(2 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This is an authentic replacement part manufactured for use with Husqvarna chainsaws. The fuel hose is used to pick up fuel from the fuel tank to be sent to the carburetor. The fuel hose is sold as an individual replacement part, please note the fuel filter is available separately.

Troubleshooting

This part works with the following brands:
  • Husqvarna
This part works with the following products:
  • Chainsaw
Part# 501426502 replaces these:
501814001,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

30 - 60 mins 

(2 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Gas line from gas tank to carburator

Stan from SUMMERVILLE, Georgia

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
Parts Used:
501426502
Removed chainsaw bar and chain.
Removed carburetor cover.
Removed muffler.
Removed chainsaw handle.
Removed mounting bolts that mounts the chainsaw upper unit (assembly includes carburetor, flywheel, cylinder) to the lower unit (assembly includes gas and oil tanks). This step was necessary to get to the top of the gas tank so a new gas line could be installed.
Installed the new gas line by pulling it through the gas line hole in the top of the gas tank.
At this point, I noticed that the two front anti-shock & vibration elements had separated so I ordered and installed new parts to replaced the broken ones.
With new parts installed , I then reassembled the 40-year old Husqvarna chain saw and started the engine. No more gas leak and the less vibration in the chain saw.

I have come to trust and rely on eReplacement Parts for repair parts to keep my power tools in working condition. Thanks for your continued prompt and reliable service.

Stan
Did you find this story helpful?
Thank you for voting!

20 year old fuel was tired

Jeff from Wilseyville, California

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers
Parts Used:
591375401, 501426502
1. Disassemble fuel tank from saw.
2. Remove old line & grommet (in my case)
3. Thread new line with molded-in grommet, through filler hole then fuel line hole.
4. Lubing the line first helps to pull through tank
5. Re-assemble saw
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP8985231
Manufacturer Part Number: 501426502
Brand Model Number Description
Husqvarna 181 Chainsaw - Chainsaw
Husqvarna 2100 Chainsaw - Chainsaw
Husqvarna 2100CD Chainsaw - Chainsaw
Husqvarna 2101 Chainsaw - Chainsaw
Husqvarna 281 Chainsaw - Chainsaw
Husqvarna 285 Chainsaw - Chainsaw
Husqvarna 288 Chainsaw - Chainsaw
Husqvarna 288EPA Chainsaw - Chainsaw
Husqvarna 298 Chainsaw - Chainsaw
Husqvarna 480 Chainsaw - Chainsaw