Clutch Cover 537033507

Clutch cover replacement:
1. Backed-off the chain tensioner adjusting screw.
2. Remove the two nuts holding the clutch cover onto the engine.
3. Removed the clutch cover.
4. Put new cover in place and installed the clutch cover nuts being careful to align the chain tensioner pin.
5. When the cover nuts are sn ... Read more ug, tighten the chain tensioner screw.
6. Tighten cover nuts.
7. Run saw for a minute then re-tension the chain.

Replace air filter:

1. Go into kitchen and have a cup of coffee.
2. With saw on work bench use a flat tip screwdriver to un-snap the plastic air filter cover retainers.
3. Remove air filter cover. Set aside.
4. Remove air filter by unscrewing the thumbscrew. If thumbscrew is too tight you may need a flat tip screwdriver or a pair of duck bill pliers to loosen it.
5. Using a cleaning brush clean all debris away from the air filter where it attaches to the engine.
6. Remove old air filter.
7. Remove thumbscrew from old filter and put it in the new filter.
8. Place filter on engine and tighten thumbscrew.
9. Replace the air filter cover and secure it by snapping the plastic retainers into position.