This auto oiler assembly is an OEM direct from Shindaiwa. The metal component is fitted onto the tube and worm gear, providing oil to the bar of the chainsaw. For the repair, you will need a screwdriver, socket set and wrench set. Please refer to the manual for safety and repair instructions. The auto oiler assembly is sold individually.
Troubleshooting
This part works with the following brands:
Echo
Shindaiwa
This part works with the following products:
Chainsaw
Part# C022000000 replaces these:
C022000000,
★
Customer Part Reviews
?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(1 Review)
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 star
0
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
.ereplacement parts is the best!
Now my chainsaw works like a new now
Guest - April 1, 2021
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Unscrewed clutch from motor shaft it had left hand threads
Remover clutch drum to get to oil pump
Replaced oil pump
Put clutch drum back on shaft
Screwed clutch back on motor shaft
Put on all covers back on
Ready to cut wood
Did you find this story helpful?
Thank you for voting!
No oil was reaching the bar on my Echo CS400 chainsaw.
1. I knew the bar was not getting oil. I tried cleaning the filter and the line to the pump.
That did not work, so I knew there was something else wrong.
2. I watched a YouTube video and saw that the drive gear on the oil pump might be stripped.
3. To verify that the oil pump was bad, I ordered a special clutch removal t
... Read moreool (the oil pump is under the clutch) and took it apart before ordering parts. The clutch removal tool is a disk with three studs on it that turns the clutch to break it free. It takes a 3/4 wrench to turn.
4. You will need to remove the bar and chain. Then, remove the spark plug and stuff some rope in the cylinder to keep the piston from moving when you do this. Please leave enough that you can pull the rope out when you are done!
5. To remove the clutch, turn it clockwise, not counterclockwise like a regular nut.
6. Once the clutch is removed you will find some washers, the chain drive gear, a needle bearing and the beneath all this, the oil pump. All of this is shown on the e-replacement\'s excellent parts breakdown.
7. The oil pump is held in place by two screws. It was locked up, and its plastic gear was stripped. The gear cannot be replaced. You have to buy the whole pump.
8. I ordered the pump along with a small needle bearing that supports the chain drive gear, from e-replacements.
9. Always inspect all your parts while you have the chainsaw apart. It is a good time to replace the chain drive gear if it is chewed up. The little needle bearing is pretty delicate and I would always take this chance to replace it.
10. Putting the saw back together was the reverse of disassembly and took about five minutes. I greased the needle bearing thoroughly before putting it all together.
11. This repair worked like a charm. I now have oil on the bar and the saw is cutting like new.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9315583
Manufacturer Part Number: C022000000
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
