Part Location Diagram of V100000270 Echo Gasket, Cylinder
See part B-7 in the diagram
( Grid squares measure 1x1 inch )

Gasket, Cylinder V100000270

Manufactured by:
Echo
ERP Number:
ERP9235552
Part Number:
V100000270
Original Equipment Manufacturer ?
  Works with your model  CS-620P!
$5.95
In Stock
Delivers in 3-5 Business Days!
Minimum Quantity of 2 required

A Bit Difficult 

1- 2 hours 

(1 rated repair) ?
  Works with your model   CS-620P!

Product Description

?

This is a genuine replacement part sourced directly from the manufacturer. The cylinder gasket is commonly found in Echo chainsaws and engines. This part is made of flexible plastic, and is used to seal the connection between the cylinder and the crankcase. You may require an Allen wrench or screwdriver when replacing this item. The cylinder gasket is sold as an individual replacement part.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Echo
  • Shindaiwa
This part works with the following products:
  • Chainsaw
Part# V100000270 replaces these:
V100000270,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

1- 2 hours 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Bad ring, piston and cylinder

TJ from Beavercreek, Oregon

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers, Socket set
Removed air filter cover and filter, handle, cylinder cover, spark plug, compression release valve and muffler.
Loosened carb to access rubber fuel mix intake pipe.
Removed cylinder, covered crankcase, removed piston and associated parts in the kit, and the gasket.
Prepped crankcase for new gasket and checked fitment of new piston to cylinder.
Installed the lubed piston, ring and cylinder and all parts described above in reverse order.
To get the new ring to seat properly I put a teaspoon of oil in the cylinder prior to insralling the spark plug. With the plug installed I cranked it over until it fired off and ran it for a couple minutes to get the ring seated.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP9235552
Manufacturer Part Number: V100000270
Brand Model Number Description
Shindaiwa 591 Chainsaw - Gasoline Chainsaws
Shindaiwa 600sx Chainsaw - Gasoline Chainsaws
Echo CS-590 Chainsaw - 59.8cc Timber Wolf Chain Saw
Echo CS-600 Chainsaw - Chainsaw
Echo CS-600P Chainsaw - 59.8cc Chainsaw
Echo CS-620P Chainsaw - 59.8cc Professional Grade 2-Stroke Engine
Echo CS-620PW Chainsaw - 59.8cc Professional Grade 2-Stroke Engine