The auto oiler attaches to the pipe and the impulse tube. This is an OEM Shindaiwa and Echo part directly sourced from the manufacturer for use in chain saws. This is available as an individual replacement part and is made of metal. A screwdriver may be necessary during the installation of this item. It may become broken and will need to be replaced.
Troubleshooting
This part works with the following brands:
Echo
Shindaiwa
This part works with the following products:
Chainsaw
Part# P021001980 replaces these:
P021001980,
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
To replace Auto oiler you must remove the clutch and drum The chain sprocket showed ware so I replaced it also.To remove the clutch I made a clutch tool using a 2inch X3/4 inch 12 inches long piece of oak drilled 3. 1/4 holes matching the clutch installed drift pins in holes. to stop engine from turning over I inserted rope into the spark
... Read more plug hole leaving rope hanging out so you can remove rope when job is complete the rope stops piston movement and allows you to turn clutch with out crank shaft movement. With clutch, drum and sprocket removed remove two screws from oiler and remove oil lines from ouler with out removing line from oil tank.Reverse order install new parts and the job is complete. They do make piston stop plug and a clutch tool you can order them through ereplacement parts when ordering your parts. Being a retired contractor with a full tool shop I Improvise when necessary. If you are a DIY guy buy the tools when placing your order and it will be an easy job.
haven\'t finished yet cause I can\'t get the worm gear pressed onto the shaft also it was incredibly difficult to remove same. As for the cs352 that the branch fell on repairs on that went well. On the cs400 oiler repair I would not recommend trying to replace the worm gear unless it is obviously damaged the oiler can be switched out with
... Read moreout removing it.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
