Part Location Diagram of 12310105960 Echo Diaphragm/gasket Kit
See part A-33 in the diagram
( Grid squares measure 1x1 inch )

Diaphragm/gasket Kit 12310105960

Manufactured by:
Echo
ERP Number:
ERP8858739
Part Number:
12310105960
Original Equipment Manufacturer ?
  Works with your model  CS-341!
Special Order

Easy 

30 - 60 mins 

(4 rated repairs) ?
  Works with your model   CS-341!

Product Description

?

This is a genuine OEM sourced part used on many hedge clippers and chainsaws. The diaphragm/gasket kit is composed of metal, cardboard composite and plastic components. This kit is fitted in the carburetor, protecting components from leakage and friction. A screwdriver is needed for the proper repair. The diaphragm/gasket kit is sold individually. However, this kit is also included in the repair kit (12310037330). Please refer to the specific manual for additional replacement instructions.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Echo
This part works with the following products:
  • Chainsaw

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(3 Reviews)
Click to filter by ratings:
  • 5 stars
    3
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

30 - 60 mins 

(4 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Chainsaw dies when given throttle, diaphragm stiff and brittle

Alex from OVERLAND PARK, Kansas

3 of 3 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
12310105960
1. Disconnect fuel lines and throttle linkage from carburetor
2. Remove carb from engine.
3. Remove diaphragm cover from \"top\" of carb and fuel pump cover from \"bottom\" of carb.
4. Remove old, stiff, and brittle diaphragm and gaskets.
5. Install new, flexible diaphragms and gaskets.
6. Re-install diaphrag m cover and fuel pump cover.
7. Re-install carb.
8. Reconnect fuel lines and throttle linkage.
Did you find this story helpful?
Thank you for voting!

WasnGÇÖt getting fuel properly and engine would stumble on full throttle

Gary from North Branch , Minnesota

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Parts Used:
12310105960
Removed carburetor and installed new diaphragm and gasket kit ran good after parts supplied were correct
Did you find this story helpful?
Thank you for voting!

Chain saw got debris in the carb blocking reed valve

Frank from Belvidere , Illinois

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Parts Used:
12310105960
Removed carb from saw
Clean debris out of valve
Took apart carb and clean
Replaced diaphragm and gasket
Reassemble And adjust carb

Runs great
Did you find this story helpful?
Thank you for voting!

Dirty Carb

richard from Santa rosa, California

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Parts Used:
12310105960, 12318139130
Took carb apart cleaned with carb cleaner and assembled with new parts I bought from you.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP8858739
Manufacturer Part Number: 12310105960
Brand Model Number Description
Echo CS-300 Chainsaw - Chainsaw
Echo CS-3000 Chainsaw - Chainsaw
Echo CS-301 Chainsaw - Chainsaw
Echo CS-305 Chainsaw - Chainsaw
Echo CS-306 Chainsaw - C07511001001 - C07511999999 Chainsaw
Echo CS-340 Chainsaw - Chainsaw
Echo CS-3400 Chainsaw - Chainsaw
Echo CS-341 Chainsaw - Chainsaw
Echo CS-345 Chainsaw - Chainsaw
Echo CS-3450 Chainsaw - Chainsaw
Echo CS-346 Chainsaw - Chainsaw
Echo HC-1600 Hedge Trimmer - Hedge Clipper
Echo HC-2100 Hedge Trimmer - Hedge Clipper