Part Location Diagram of A127000371 Echo Cover, Dust
See part A-13 in the diagram

Cover, Dust A127000371

Manufactured by:
Echo
ERP Number:
ERP16757503
Part Number:
A127000371
Original Equipment Manufacturer ?
  Works with your model  CS-355T!
$5.95
Special Order

A Bit Difficult 

1- 2 hours 

(4 rated repairs) ?
  Works with your model   CS-355T!

Troubleshooting

This part works with the following brands:
  • Echo
This part works with the following products:
  • Chainsaw
Part# A127000371 replaces these:
A127000370,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

1- 2 hours 

(4 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Replaced dust Cover and Muffler Cover

Edwin from OMAHA, Nebraska

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Wrench set
Parts Used:
A127000371, A320000940
I added a machine screw to help hold the dust cover to the case because this is a poor design by Echo on the model CS-355T. That required some drilling, skill, and tools but it works. Muffler cover just required bolting in place and throwing the burned out cover away.
Did you find this story helpful?
Thank you for voting!

Broken chain brake strap. missing dust cover, and burned out exhaist cover

Edwin from OMAHA, Nebraska

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers
Replaced all three parts that were either damaged or missing.
Did you find this story helpful?
Thank you for voting!

Top shroud panel kept popping off. Very poor design. Owner lost it.

Edwin from OMAHA, Nebraska

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
A127000371
Drilled a hole in the cover panel and the case. Used a sheet metal screw to hold it in place. Works fine now. Hard to believe this original design was approved by Echo.
Did you find this story helpful?
Thank you for voting!

Crushed saw

David from Meridian, Idaho

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers
I ran over my echo 355t three years ago. I was looking at ebay and happened upon a parted out saw body that was available. I bought it and when I got it, I tore my crushed saw apart, put engine and any usable parts on to the good saw body. Once all the parts were swapped, I was able to tell what else I needed. I spun around from my wo rk bench to my laptop, went to Ereplacement parts and ordered the parts that I needed. Within a short time I received the exact parts I ordered and had my favorite climbing saw back up and running. I appreciate ya\'ll for always having the parts I need to make my own repairs. I love that saw and have used it on every job since. Thanks again.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP16757503
Manufacturer Part Number: A127000371
Brand Model Number Description
Echo CS-350T Chainsaw - Echo Chainsaw Model CS-350T/SERIAL: C23411001001-C23411999999 (CS350T/SERIAL:C23411001001C23411999999, CS 350T/SERIAL: C23411001001 C23411999999) Parts
Echo CS-355T Chainsaw - 35.8cc Top Handle Chain Saw
Echo CS-360TES Chainsaw - Chainsaw