This is an authentic Echo replacement part that is sourced from the original manufacturer for use with chainsaws. The plastic brake lever fits into the sprocket guard and is used to actuate the brake band to stop the clutch drum and sprocket that drives the chain. This item is available as an individual replacement part.
Troubleshooting
This part works with the following brands:
Echo
Shindaiwa
This part works with the following products:
Chainsaw
Part# C320000501 replaces these:
C320000501,
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Replacement of chain brake lever was easy and eReplacement part was PERFECT fit.
1) Remove 2 nuts on bar cover, loosen chain tensioner screw, remove chain & bar.
2) Remove Torx-head screw holding brake lever in place.
3) Remove brake lever, be sure to save metal bushing - takes a bit of force.
4) Use the opportuni
... Read morety to clean the parts of oil, sawdust, grime, etc.
5) Replace brake lever - again, use a bit of force to snap it into place. Replace bushing. Replace torx-head screw.
6) replace bar, chain, and bar cover. BE SURE TO GET CHAIN IN RIGHT DIRECTION!
7) Replace nuts on bar cover, hand-tighten. Now tension the chain with the tensioning screw. Tighten nuts on bar cover.
You are DONE!
I ran over my echo 355t three years ago. I was looking at ebay and happened upon a parted out saw body that was available. I bought it and when I got it, I tore my crushed saw apart, put engine and any usable parts on to the good saw body. Once all the parts were swapped, I was able to tell what else I needed. I spun around from my wo
... Read morerk bench to my laptop, went to Ereplacement parts and ordered the parts that I needed. Within a short time I received the exact parts I ordered and had my favorite climbing saw back up and running. I appreciate ya\'ll for always having the parts I need to make my own repairs. I love that saw and have used it on every job since. Thanks again.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP11826371
Manufacturer Part Number: C320000501
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Transmission or Clutch","title":"Transmission or Clutch","url":"/parts/lawn-and-garden/chainsaw/transmissions-and-clutches/"},{"position":2,"name":"C320000501","title":"C320000501","url":""}]
_WW_3.gif "Part Location Diagram of C320000501 Echo Brake Lever")
_WW_3.gif "Part Location Diagram of C320000501 Echo Brake Lever")
