Part Location Diagram of A556001580 Echo Drum, Clutch
See part C-3 in the diagram
( Grid squares measure 1x1 inch )

Drum, Clutch A556001580

Manufactured by:
Echo
ERP Number:
ERP11826338
Part Number:
A556001580
Original Equipment Manufacturer ?
  Works with your model  CS-590!
$60.67
In Stock
Delivers in 3-5 Business Days!

Easy 

30 - 60 mins 

(3 rated repairs) ?
  Works with your model   CS-590!

Product Description

?

The clutch drum goes between the needle bearing and the washer. This authentic item is supplied directly from the original equipment manufacturer for use with Echo chainsaws. Keep in mind that this high-quality part is made of metal and sold individually. If this part becomes broken it will need to be replaced and may require a set of pliers, a socket set, and a screwdriver during the installation.

Troubleshooting

This part works with the following brands:
  • Echo
  • Shindaiwa
This part works with the following products:
  • Chainsaw
Part# A556001580 replaces these:
A556001580,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

30 - 60 mins 

(3 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

The sprocket was worn

Jeffrey from Cypress, Texas

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Socket set
Parts Used:
A556001580
Removed the clutch cover
Remove the e-ring from the shaft with the washer
Removed the old clutch drum and installed the new one
Replaced the washer and e-ring
Attached the clutch cover
Did you find this story helpful?
Thank you for voting!

Gear wore down and causing chain to bind.

Bill from Spring, Texas

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
A556001580
1. Remove chain cover
2. Remove chain & bar
3. Remove c-clip & washer holding on drum clutch.
4. Removed bad drum clutch.
5. Install new drum clutch.
6. Re-install c-clip and washer.
7. Re-install bar & chain.
8. Re-install chain cover & adjust chain.
Did you find this story helpful?
Thank you for voting!

fly wheel keyway broke

Richard from Gig Harbor, Washington

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Socket set, Wrench set
remove fly wheel replace change bearings clutch very simple repair
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP11826338
Manufacturer Part Number: A556001580
Brand Model Number Description
Shindaiwa 591 Chainsaw - Gasoline Chainsaws
Echo CS-590 Chainsaw - 59.8cc Timber Wolf Chain Saw