This is a genuine OEM replacement bar for an Echo chainsaw. The 16 inch double guard bar is designed for use with small cc chainsaws. It is composed of a chrome moly-steel that provides superior bar strength for heavy use. The small nose radius of this bar reduces kickback energies. This bar also has an oil retaining feature that keeps the oil from leaking out in order to keep more oil on the bar as well as the chain. Oil and chain are sold separately.
Removed the spark plug
Insert a knoted piece of small rope into the spark plug hole. Leave a tail to remove this later. This is necessary to keep the cylinder from moving while removing the clutch assembly. The thread is a left hand thread.
Used a chisel and hammer to remove the old clutch assembly
This creates a quick j
... Read moreolt to loosen the assembly.
Remove the old clutch assembly.
Remove the knoted rope from the spark plug hole
Reinsert the spark plug
Install the new clutch assembly, (washer, bearing, clutch drum, washer, clutch assembly) on the crankshaft. Remember, it\'s a left hand thread.
Lightly tap it with a chisel to tighten it.
Install the bar and chain and crank the saw.
The clutch assembly will tighten as you use the saw.
Replaced the old part with the recent ordered part. No special instructions. Straight forward repair of the item just make sure the chainsaw cutting teeth are facing to the rear of the saw.
Did you find this story helpful?
Thank you for voting!
Chain was sharp but cut would veer to the left as the cut proceeded.
Bar was worn after years of use, even after rotating the bar upside down to achieve even wear. Simple loosen the nuts, remove the old bar and install the new. Could not be easier.
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP11826076
Manufacturer Part Number: 16A0CD3757C
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_2.gif "Part Location Diagram of 16A0CD3757C Echo Guide Bar - 16")
_WW_2.gif "Part Location Diagram of 16A0CD3757C Echo Guide Bar - 16")
