Part Location Diagram of 91PX056G Oregon Advancecut Saw Chain, 16 In
See part A-22 in the diagram
( Grid squares measure 1x1 inch )

Advancecut Saw Chain, 16 In 91PX056G

Manufactured by:
Oregon
ERP Number:
ERP19013288
Part Number:
91PX056G
Original Equipment Manufacturer ?
Special Order

Easy 

15 - 30 mins 

(3 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

The Oregon 91PX056G 16" AdvanceCutGäó Saw Chain is a low-vibration and low-kickback chain. It met the kickback performance requirement of ANSI B175.1 when tested on a representative sample of chainsaws. Its safety features significantly reduce the hazard of kickback while maintaining high cutting performance. All cutting chain can kickback , which may result in severe personal injury to the chainsaw operator or bystanders. Operate your chainsaw safely. Read all warnings in your chainsaw operator manual. Fits 16

Troubleshooting

This part works with the following brands:
  • Craftsman
  • Remington
This part works with the following products:
  • Chainsaw
Part# 91PX056G replaces these:
  • 91P056G
  • 91PX056CK
  • 91PX056G
  • 91PX056X
  • 91PXL056CK
  • 91PXL056G
  • 91VG056CK
  • 91VG056G

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(5 Reviews)
Click to filter by ratings:
  • 5 stars
    5
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(3 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Electric Chain saw would not work.

Thomas from NORTH SAINT PAUL, Minnesota

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
Parts Used:
91PX056G, 530402879
1. Removed Chain and bar
2. Cleaned away oily saw dust from around oiler and chain drive gear
3. Removed the kick-back plate and handle.
4. Removed chain drive gear using retainer ring pliers.
5. Opened up compartment containing switch using allen wrenches
6. Tested switch to see if open by connecting ohm met er across switch and operating switch
7. Ordered switch and new chain saw blade
8. Thoroughly cleaned out saw interior of oily saw dust
8. Changed Switch
9. Removed high speed (small gear on motor shaft) pinion gear using retainer ring pliers
10. Tested switch by starting motor
11. Reinstalled high speed gear
12. Reinstalled large gear, being careful to make sure the washer stays in place
13. Closed up the switch compartment
14. Reinstalled kick-back plate and handle
15. Reinstalled chain drive gear
16. Reinstalled bar and new chain
17. Greased the bearing in the bar tip.
18. Installed the chain cover, leaving the bolts loose
19. Adjusted the chain tension.
20. Tightened the chain cover bolts
21. Tested the chainsaw.
Did you find this story helpful?
Thank you for voting!

chain was wore out

gene from elfrida, Arizona

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Socket set
Parts Used:
91PX056G
removed chain and replaced it with the new one: 15 minutes
Did you find this story helpful?
Thank you for voting!

Needed a new chain, couldn\'t find it locally, found one here. Just replaced the chain.

Tommy from BIRMINGHAM, Alabama

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Wrench set
Parts Used:
91PX056G
1. remove the old chain 2. clean the bar & around the gear 3. install the chain & tighten it.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP19013288
Manufacturer Part Number: 91PX056G
Brand Model Number Description
Craftsman 358341010 Chainsaw - Chainsaw
Craftsman 358341020 Chainsaw - Chainsaw
Craftsman 358341060 Chainsaw - Chainsaw
Craftsman 358341080 Chainsaw - Electric Chainsaw
Craftsman 358341090 Chainsaw - Chainsaw
Craftsman 35834111X Chainsaw - Chainsaw
Craftsman 358341160 Chainsaw - Chainsaw
Craftsman 358341161 Chainsaw - Electric Chainsaw
Craftsman 358341170 Chainsaw - Chainsaw
Craftsman 35834180 Chainsaw - Chainsaw
Craftsman 35834180X Chainsaw - Chainsaw
Craftsman 35834189 Chainsaw - Chainsaw
Craftsman 35834260 Chainsaw - Chainsaw
Craftsman 358344910 Chainsaw - Chainsaw
Craftsman 358348211 Chainsaw - Chainsaw
Craftsman 358350060 Chainsaw - Gas Chainsaw
Craftsman 358350160 Chainsaw - Gas Chainsaw
Craftsman 358350260 Chainsaw - Chainsaw
Craftsman 358350270 Chainsaw - Chainsaw
Craftsman 358350360 Chainsaw - Chainsaw
Craftsman 358350370 Chainsaw - Gas Chainsaw
Craftsman 358350460 Chainsaw - Gas Chainsaw
Craftsman 358350461 Chainsaw - Chainsaw
Craftsman 358350462 Chainsaw - Chainsaw
Craftsman 358350560 Chainsaw - Gas Chainsaw
Craftsman 358350561 Chainsaw - Chainsaw
Craftsman 358350562 Chainsaw - Chainsaw
Craftsman 358350570 Chainsaw - Gas Chainsaw
Craftsman 358350660 Chainsaw - Chainsaw
Craftsman 358350670 Chainsaw - Chainsaw