I replaced the comp pump,belt, and conversion kit for the unloaded valve. Put synthetic mobile 1 in the compressor pump a 10 w30 wait and it operated flawlessly and was quieter than the old pump which sustained a broken crankshaft but it ran for 23 years moderately to hard operation! Thx for the new parts! It was very affordable and chea
... Read moreper than buying a new air compressor!
Read less
Did you find this story helpful?
Thank you for voting!
Compressor pump was shot, noisey & very slow to come back up to working pressure .
Removed shields, loosened motor bolts, removed drive belt. Unbolted pump & air supply lines moved pump to bench for removal of pulley.Reversed steps to Re-mount pump. Removed plug with Allen wrench to install up date kit. Ran pump short period, drained & replaced oil. All good to go.
Did you find this story helpful?
Thank you for voting!
Reeds in the head of old compressor came apart ruining the piston and head.
Removed the old pump, had to use the conversion kit I purchased to change from two line to single line. Had to press the flywheel off the old pump and press it on to the new pump, simple and easy to do.
Did you find this story helpful?
Thank you for voting!
Broken connecting rod
Leo from Joliet, Illinois
2 of 2 peoplefound this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
1. Removed the old pump
2. Installed the new pump
3. Found out the holes for installing the filter(from the old pump) were no tapped nor the right size.
4. Went out and bought the proper size drill and tap and corrected this error.
5. Made all necessary connections (no problems)
6. It Works
.
Did you find this story helpful?
Thank you for voting!
Compressor pump reed valves had failed after 31 year of service.
Victor from Sequim, Washington
1 personfound this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Unbolted old pump
mounted new pump and affixed copper pipe and bypass kit which you must have
mounted pulley
reinstalled belt
reinstalled fan shroud
Filled pump with compressor oil
ran compressor for 1 hour no load breaking period.
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
