Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Parts worked great service thank you.
Parts arrived in good condition and in just a few days thanks.
Guest - May 6, 2019
Verified Purchase
★★★★★
★★★★★
Fast and Easy Repair of Air Compressor
Repair parts were very easy to find and order, and arrived quickly in fine condition. Videos showed me how to troubleshoot my problem, what to order, and how to install the repair parts. Repair took all of about 20 minutes, and the compressor is working like new again. Thank you!
Guest - September 18, 2024
Verified Purchase
★★★★★
★★★★★
Piece of cake
Parts delivery was timely. Repair took only moments.
Anonymous - May 5, 2022
Verified Purchase
★★★★★
★★★★★
Compressor parts.
All went well. Shipped fast and the correct part arrived. Compressor works like new!
Guest - January 19, 2023
Verified Purchase
★★★★★
★★★★★
Parts fit perfectly, easy to repair
The gasket set arrived on time in great condition, air compressor running perfect!
Guest - June 13, 2023
Verified Purchase
★★★★★
★★★★★
Great part
Gasket set arrived quickly and fit perfectly!
Geoffrey - June 24, 2023
Verified Purchase
★★★★★
★★★★★
Everything was great ,tech was very helpful,however freight was crazy 7 dollars on a 4 dollar part sent by the U.S. Mail!!
Part was perfect
Dick - August 28, 2023
Verified Purchase
★★★★★
★★★★★
craftsman compressor gasket kit
Arrived very fast. was a perfect fit for a compressor that wouldn't build pressure. a common
problem i guess. head gasket leaks not allowing it to build pressure. Worked very well, took
about 20 min. to replace old gaskets. Back in business. Thank you.
Guest - July 13, 2024
Verified Purchase
★★★★★
★★★★★
Great part
Arrived quickly and great condition.My compressors like new again.
Roderick - October 5, 2021
Verified Purchase
★★★★★
★★★★★
Just what I needed
It was the right part I needed and arrived pretty quick
Guest - November 15, 2021
Verified Purchase
< Prev
1
2
3
Next >
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Easy
30 - 60 mins
(27 rated repairs)?
< Prev
1
2
3
Next >
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Compressor would build to 20 psi and no more. Top most head gasket had blown through.
Remove the four allen bolts and pay close attention to how each part comes off; the order of arrangement. Clean old gasket material with a small straight edge to prepare surfaces for new gaskets. Replace each part with new gasket in reverse order of how it was removed. Replace the head bolts and HAND tighten very firmly. I would not
... Read moreadvise a ratchet or torque wrench. Just use firm, even hand pressure in a cross pattern Use a small amount of Vaseline petro. jelly to hold reeds in place. I used NO gasket glue for reassembly. Compressor runs like a new one.
The gasket kit that ereplacement stocked saved me from having to spend $400.00 on a new compressor. The kit was complete and it took about 30 minutes to install after replacing the gaskets and turning on the compressor it came up to full pressure. The kit was very good quality and shipping was fast.
Simply remove the cylinder head,
... Read morethen line up the gaskets how the go on the compressor, and place them on. Then replace the cylinder head.
1. Removed cover over compressor cylinder head
2. Removed the cylinder head.
3. Inspected the head parts to determine reason for failure to build pressure
4. Found the head gasket to be blown
5. Cleaned the old gaskets from the cylinder and head
6. Hand lapped the head on my belt sander to insure a flat seali
... Read moreng surface
7. Used a file lightly on the cylinder to insure the mating surface was flat and clean
8. Replaced the gaskets and head, torqued screws to insure they were tightened properly
9. Replaced cylinder head cover
10. Test ran compressor -- tested ok.
Read less
Did you find this story helpful?
Thank you for voting!
Compressor was only pumping up to 25-30 lbs pressure. Removed
1. Removed compressor head and disassembled it.
2. Removed old gaskets and cleaned through.
3. Removed reeds.
4. Drained oil from the reservoir for compressor lube.
5. Removed rubber gasket and cleaned reservoir.
6. Installed new rubber gasket for reservoir head.
7. Installed new gaskets and reeds for c
... Read moreompressor head and reassembled.
8. Added lube oil to the reservoir.
9. Started compressor, built up 120 lbs. pressure.
10. Works as advertised, good.
Removed compressor head
Removed gasket and cleaned surfaces
Installed new gaskets
Replaced compressor head
Tightened everything down
Tested compressor and looked for any leaks
All was good.
Did you find this story helpful?
Thank you for voting!
Compressor leaks air and will not build up pressure
Removed cylinder head.
Removed valve plate.
Removed valve reeds.
Removed all of the old gaskets attached to these parts. Thoroughly cleaned where parts of old gaskets were still attached. Prepared them for new parts.
Also had to replace oil filler cap because part of plastic threads were damaged.
Replaced all
... Read more of these parts and compressor is working again.
Read less
Did you find this story helpful?
Thank you for voting!
Air Compressor would not build air beyond 40 pounds
1. Removed the compressor head.
2. Removed the reed seat.
3. Removed the old gaskets.
4. Installed the new gaskets and the reeds.
5. Torqued the head bolts.
Ran compressor 120 lbs, works great.
1 removed head from cylinder
2. removed old gasket
3.installed new gasket kit everything fit
4. run compressor no more leak.
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
