This is a genuine manufacturer sourced replacement part used on Waring blenders. The coupling is the part of a blender that transfers power from the blender's motor to the blade assembly. Over time, the teeth on blender coupling wear down until they no longer engage properly on the blade assembly. It is made out of plastic and it is sold individually.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Easy to use web page, decent price, fast shipping. I would buy from them again.
correct part the first time
Guest - April 8, 2020
Verified Purchase
★★★★★
★★★★★
Easy repair and install.
Arrived quickly and repair quickly completed. I appreciated the purchase prompts on the website suggesting other parts that might have been related to this particular repair.
Guest - April 22, 2020
Verified Purchase
★★★★★
★★★★★
As advertised
Ordered a replacement coupling (the thing that makes your blender, um, blend), and it arrived in about a week and worked like it should.
Guest - March 1, 2021
Verified Purchase
★★★★★
★★★★★
Fast and good!
The part was in great condition, arrive quickly and fit perfectly. My blender is working great, ty!
Guest - July 24, 2023
Verified Purchase
★★★★★
★★★★★
Exact fit
Many companies say they have a oaryvthat fits. These parts are O.E.M. perfect fit. Highly recommend.
Guest - October 8, 2024
Verified Purchase
★★★★★
★★★★★
Easy repair
Did what it was supposed to do
Guest - June 4, 2019
Verified Purchase
★★★★★
★★★★★
Blender coupling
Not particularly happy with the part when received. Gave model # etc. for my blender and the part that came in is not the one that fit the blender. I am going to have to return it for credit. I have used your company before and received my order and everything was correct and well satisfied. This just happen to be a fluke accurance.. Will use you again if need arises...
Charles - July 8, 2019
Verified Purchase
★★★★★
★★★★★
Did not fit my blender
everything indicated that I was ordering the right part. When it finally arrived, it did not fit. The thread diameter was slightly smaller than my blender mount and wont fit. Still without a blender.
Guest - October 2, 2019
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Held coupler with hand and inserted flat tip screw driver on opposite end of blender as there is a cut out. I turn it clock wise as the threads are opposite than normal and had the old coupler off and install the new one just hand tight.
1. Removed old coupler
2. Reverse threaded coupler installed using counter-clockwise rotation.
3. Finger tighten only. Will tighten more with use.
4. You are done.
This would have been relatively simple except that the coupler was on too tight for me to remove it so I had to hack it off. * Note that the coupler screws on to the motor shaft with a regular thread, not a reverse thread as is the case with most blenders. In any case, here are the steps:
1. Remove coupler
2. Remove bottom
... Read more />3. Remove motor (two screws on top of the jar adapter.
From the inside, remove the 4 screws that hold the jar adapter.
5.install the new jar adapter and reverse other steps.
Removed old coupling by:
- Holding coupling with fingers and pulling up, it was partially stripped
- Held screw under the blender motor with screwdriver and removed coupling
- Screwed new coupling on.
done
Did you find this story helpful?
Thank you for voting!
Female threads on coupling stripped. Top plate surface finish worn.
Removal of stripped coupling.
1. Coupler unable to be unscrewed from motor shaft due to stripped threads.
2. Used Dremel rotary tool with abrasive cutoff wheel to carefully cut coupler off of motor shaft.
Removal of top plate
1. Remove three screws securing bottom cover plate.
2. Remove four n
... Read moreuts securing top cover plate.
3. Remove and replace top plate.
4. Replace bottom cover.
Screw replacement coupler onto motor shaft. Use straight blade screw driver to drive motor shaft and secure to coupler.
Took off old coupling that was stripped, screwed on new one. Quick service - good price.
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
