Genuine Waring replacement part, this item is sold individually. This part acts as a seal for the blenders shown below. It is installed along with other seals and washers underneath the cutter assembly, to prevent leaks from coming out of the bottom of the container. Over time these seals and washers will become brittle and compressed, then will have to be replaced.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Very easy to replace. Nut tightens counter-clockwise.
Piece was same good quality as OEM. Once I figured out the loose nut on underneath section of the blender screwed tight counter-clockwise it was easy to put back together. That is the trick with replacing any of these parts on the blender. This is the nut that comes loose causing the blender to leak.
David - June 24, 2019
Verified Purchase
★★★★★
★★★★★
Fixed a 48 year old kitchen blender.
What a great find. My wife has a blender that no longer leaks out the bottom.
Easy fix.
James - August 29, 2019
Verified Purchase
★★★★★
★★★★★
Parts were exactly what I needed
The washers took a while to get here (they were back ordered) but once they arrived they worked like a charm and our old blender is back amongst the living again. Everything was very clearly labeled and was easy to assemble. I'd definitely purchase from them again.
Iglobal - February 8, 2022
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Remove coupling
Big crescent wrench to hold nut securing blade assbly, smaller crescent to loosen clockwise on bottom of blend. Remove blade assbly, replace 1 rubber gasket, 2 plastic gaskets, 2 stain. Steel washers and small washer under coupling. Use parts diagram to see order of installation, part numbers and quantity needed.
... Read moreReassemble, test for leaks. Voila, remember to tighten/ install button nut counterclockwise.
Removed the clip on bottom of container and pulled out the blade unit. I then installed the washer, placed the blade unit back in the container and re-attached the clip on the bottom. I also want to commend the person(s) taking the time to help me find the correct part. Both times I called for parts, both employees were courteous and ve
... Read morery helpful to me and I appreciated their patience.
I was able to change all the washers on one of the blenders to get it to stop leaking. I think I am missing a piece or two on the other one as it still leaked. I will need to get more parts.
Used pliers to hold blade assy. While I used socket set to loosen the bottom
Removed all parts and washers
blade assy. Still good so I kept it
reattached all parts and new washers to new container in the same order the came off
and tightened filled with water and checked for leaks, none found, ready to use.
1. Disassembled my bad blending assembly using my hand and a wrench for added pressure on the nut that was not easy to unscrew
2. Cleaned the residue and scraped off the bad white deteriorated gasket from the base of the blending jar.
3. Installed the new blending assembly taking care to note the order of the washers and gaske
... Read morets on the inside and outside of the blending jar.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10505518
Manufacturer Part Number: 003509
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of 003509 Waring Washer")
_WW_1.gif "Part Location Diagram of 003509 Waring Washer")
