This genuine item is supplied by the original equipment manufacturer for use with Delta drum sanders. It is an identical replacement for a worn, a damaged or a missing belt that was installed on a new equipment. A new belt will usually be tighter on one side than the other. Frequent adjustments are normal for the first few hours due to belt stretch. Adjustments to belt tracking can also affect belt tension. One durable belt is included. Refer to the owner's manual for your model to ensure the correct repair procedure.
Troubleshooting
This part works with the following brands:
Delta
This part works with the following products:
Belt or Drum Sander
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Removed allen screws holding sander table, then remove the table.
Loosen the two socket head set bolts equally on each side until the belt tension is relieved Installed new infeed belt. Reinstalled screws. Aligned belt and set tension on belt. Count the
number of turns as you loosen the bolts.
Slide the old feed bel
... Read moret off and slide the new one on.
Reverse what you have done to complete the replacement of the drive belt.
Loosen the tracking screws. Remove the two screws holding the conveyor belt platform. Lifted the platform to slide the new conveyor belt on. Then replace the screws holding the platform. Then adjusted the tracking screws to get the belt to track correctly. Used some WD-40 to loosen some items that were stubborn!!
1. Took the feeder table off.
2. Released the tension screws.
3. Slid on the new belt.
Simple as 1 2 3.
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
