Char-Broil Grill Elements and Burners

This stainless steel infrared emitter plate is designed for Char-Broil Tru-Infrared gas grills, providing even heat distribution and protecting food from direct flames for consistent cooking results. As part of the Tru-Infrared system, it converts heat from the burners into infrared energy, ensuring flavorful, evenly cooked meals. Ideal for replacing worn or damaged plates, this OEM component rest...

This is an original Char-Broil replacement part manufactured for use with outdoor grills. The burner is used to disperse flames evenly across the firebox. Over time the burner tubes can corrode and replacing damaged burners can extend the life of the grill. The main burners are sold individually.

This stainless steel infrared emitter grate is designed for Char-Broil 3-burner Tru-Infrared gas grills, providing even heat distribution and reducing flare-ups for consistent grilling results. Positioned beneath the main cooking grates, it absorbs heat and radiates it upward while vaporizing drippings to enhance flavor and prevent flare-ups. Each grate measures approximately 17-1/8" x 8-1/8", and...

This is a genuine Char-Broil replacement part. it is sold individually. The burners are the part of the grill that the flame rises from. This burner is equipt with spider guards. The Burners flame is controlled by the control knobs that are attached to the Valve/Manifold/Regulator. It is a good idea to keep these clean and covered as they have a tendency to rust and corrode. Includes wire mesh spider guards.

This burner brace is a replacement support component designed to stabilize and position a burner assembly securely. It helps maintain proper alignment and is commonly replaced when bent, warped, or damaged by heat or wear.

This stainless steel main burner tube is designed to deliver even, consistent heat across the grill cooking surface. By distributing gas efficiently, it helps ensure reliable ignition and uniform cooking performance. Built for durability, this replacement burner is ideal for restoring proper heat output when an existing burner becomes rusted, corroded, or uneven, helping maintain dependable grilling results.

This is an authentic replacement part sourced directly from the manufacturer. The sideburner is commonly found in Char-Broil grills. This part is made of metal, and is used to carry gas to the sideburner assembly that can be used as a stove top element on the grill. This product is provided as an individual replacement part.

It is an authentic OEM part which is specially designed for Char-Broil grills. The electrode provides a spark that arcs to the main burner to ignite the gas. If the burner won't light, first clean the electrode and check that it's aligned. If the problem persists, replace the igniter electrode. This item will provide an identical replacement for the original part that was installed on a new unit. ...

This is a genuine manufacturer sourced replacement burner tube. It is by Char-Broil for use with some of their grills. This is the main burner that the flames would rise from. Please note, this tube includes the mounting hardware for the crossover tube, 2 cotter pins and 1 stud screw. This burner assembly is made out of stainless steel and it is sold individually. You will need pliers and a scre...

This Emitter is sourced directly from Char-Broil and is an authentic OEM replacement part for Char-Broil grills.

It is an authentic component which is supplied by the original equipment manufacturer. This electrode set is designed for use with Char-Broil grills. The electrode provides the spark that ignites the main burner. It is an identical replacement for a faulty or a missing item that was installed on a new unit. If the burner won't light, first clean the electrode and check that it's aligned. If the pr...

This genuine OEM sourced replacement part is designed for Char-Broil grills. Burners distribute gas to create an even flame across the cooking area. This burner is made out of stainless steel and it is sold individually. No tools needed to replace this burner. • Make sure the gas tank is disconnected • Remove burner from the valve • Install the new burner • Re-connect the gas and test the grill

This item is an authentic Char-Broil part that is OEM sourced and intended to be used with outdoor gas grills. The electrode is used to create an electric arc on the burner which ignites the fuel that is emitted by the burner. This item includes the lead wire and the mounting hardware, but it is priced as a single item.

This is a Genuine Manufacturer Approved replacement Burner designed for Char-Broil Grills. This part is made out of Stainless Steel and it is Sold Individually. This is the Part that the flames rise from and allow grill temperature to be properly maintained. This Round burner used in sets of two or three depending on grill model. Ignitor electrode is included in this Assembly and it comes alread...

This stainless steel heat tent is designed for grills with a dedicated searing burner, helping protect the burner from drippings while reducing flare-ups and promoting more even heat. Its rounded-top design and durable construction make it a reliable replacement when the original heat shield becomes rusted or damaged. With an easy, straightforward installation, it helps restore smooth grilling per...

This is a genuine manufacturer sourced replacement part designed for Char-Broil grills. It is the part from which flames rise from. The design of this burner allow for an even cooking area. This burner is made out of stainless steel and it is sold individually. This assembly includes hardware used to attach it. To complete this repair you would need a screwdriver. • Disconnect electrodes and g...

OEM Rolled Stainless Steel Emitter is sold individually. This is the emitter tray only designed to be paired with a cast iron cooking grate part 80021355. Dimensions are approx. 18-1/4 X 8-7/8" Part is 5/8" Thick. If the part is heavily rusted or damaged it needs to be replaced.