This is an authentic NuTone replacement part that has been sourced from the original manufacturer to be used with exhaust fans. The motor is used to drive the fan to move air through the vents. This item is available as an individual replacement part.
Troubleshooting
This part works with the following brands:
Broan
Nutone
This part works with the following products:
Bath & Ventilation Fan
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1. Turned on power (light & fan switch): Fan not working.
2. Checked power on fan housing receptacle with beeper (okay).
3. Removed fan motor module (loosen two screws & twist).
4. Recheck (plugged in to power outlet still not working).
5. Used multi-meter (continuity function): Open transformer windings.
6.
... Read more Ordered parts (motor, fan blade, filter, fan blade cover, and plastic knob.
7. Assembled motor on housing and fan blade on motor.
8. Reinstalled new parts in ventilation housing (careful to route power wiring).
9. Install filter, ventilation cover, and knob.
10. Test with fan/light switch.
11. Back to normal ops.
Very easy repair for these older Nutone exhaust fans.
1) Remove outer vent grille, typically with thumb screw
2) Fan assembly is held in by 2 Philips screws, but unplug fan first.
3) Remove fan assembly, I only needed the 2 small nuts from where the fan motor attaches to the bracket to re-use for new one.
... Read more4) Install new fan motor to new bracket, re-use old nuts.
5) Install new fan blade on new motor, make sure to line up notch.
6) Clean up dust/dirt, or in my case many years of cooking oil!
7) Reinstall new assembly, check to make sure fan blade rotates freely!
8) If all good, plug in fan motor and test.
9) Reinstall grille (clean if needed).
Remove fan cover
Unplug motor and unscrew from main bracket
Remove motor from support bracket
Put new motor on support bracket and put back on main bracket.
Plug in and turn on to see if the fan rubs on the side,if so adjust and tighten down and put filter and cover back on.
Did you find this story helpful?
Thank you for voting!
Motor rarely kicked over. When it did it made a high screeching noise.
1) Loosen nut to remove outer grill
2) Use Phillips to loosen screws holding baseplate/motor in fan housing. Unplug motor and drop out baseplate/motor.
3) Loosen nuts holding motor onto baseplate, remove motor.
4) Put new motor on, replace nuts, press new fan blade onto spindle.
5) Install motor/base plate back int
... Read moreo housing, replace grill.
6) Turn on new working fan and smile!
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10279940
Manufacturer Part Number: S34417000
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
