Unplug saw . Removed table by removing table tilt knobs. Removed the trunnions from table. Put new clamp shoe and hex screw together and place in trunnion ,then put bolts back in.. Now we put table back onto saw and tighten the knobs up . Ready to go. Note the parts that were replaced were made better than the original parts .Thanks erepl
... Read moreacement parts for your service. you will be recommended to others.
Remove table, remove trunnion bracket from table, remove knobs from broken trunnions and other associated parts. Place scale on the new outer most trunnion.place trunnions on, trunnion bracket, place assembly on the table. Install the table on the bandsaw. Insert new pin into split in table, insert the new table insert. Attach the dust co
... Read morellection port. I also needed a miter guage.
Read less
Did you find this story helpful?
Thank you for voting!
Brand new 14\" band saw was moderately damaged from from what appeared to be impact damage.
1) disassembled entire machine to inspect/ repair any/ all damaged parts.
2) ordered new wheel tires, table trunnions, door closure stud, table angle scale, and miter gauge.
3) removed oxidation from all existing parts, lubricated all fasteners with anti-sieze, polished & greased all friction parts.
4) honed & waxed tabl
... Read moree top
5) installed set screw hole & screw to top wheel axle housing.
6) installed new wheel tires.
7) replaced both broken table trunnions
8) installed missing table angle scale.
9) installed missing upper & lower door closure studs & knobs.
10) repaired damaged ( cracked/bent) upper wheel with epoxy metal. Balanced & corrected run-out.
11) painted all rusted surfaces.
12) Ereplacement parts , again, had everything that I needed, including a very handy exploded view of my machine.
Read less
Did you find this story helpful?
Thank you for voting!
Trunnions were broken.
j from apollo beach, Florida
0 of 1 peoplefound this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
