This is an authentic OEM sourced part which is designed for Porter Cable band saws. It is an important part of the mechanism which mounts the table and allows a user to adjust the cutting angle. Over time it may wear out or get damaged eventually requiring a replacement to ensure your equipment functions properly. Make sure to refer to the owners manual and the appropriate diagrams of your model for the correct installation and application of this component. This high-quality trunnion is made of durable metal and is sold as an individual item. Note, the hardware to secure it is sold separately.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Extremely Fast Turnaround.
This trunnion was a perfect match for my PC bandsaw. I was extremely happy with this purchase, because the price was great, and shipping costs were very modest, especially considering how fast it arrived. When these guys say “ships within one business day” they really mean it.
Guest - April 25, 2020
Verified Purchase
★★★★★
★★★★★
parts where better than the orginal
parts worked perfectly
Guest - August 20, 2021
Verified Purchase
★★★★★
★★★★★
A smidgen thicker than original
I had to grind down the nut that slides inside to fit but it’s still a good part. My trunnions broke from turning the bandsaw using the table. That’s definitely a no no. Shipping was fast. Thanks
Guest - June 2, 2022
Verified Purchase
★★★★★
★★★★★
Easy install
I received the parts on time. Installed reunions with no problem. Set the table position with no problem.
Anonymous - May 31, 2022
Verified Purchase
★★★★★
★★★★★
faster fix
Tried to order from another business. 4 weeks later I thought "I had used -EReplacements before, let's see what they could do"?
A week later the part was here. Thanks.
Guest - January 19, 2023
Verified Purchase
★★★★★
★★★★★
trunnion installed in a Chinese bandsaw
The trunnion received was a better quality than the original (thicker and stronger).I had to file a little bit on the part that goes inside, so it can slide from side to side. Other than that my new one was identical as the old one . Very happy with the part and specially the price.
Guest - March 21, 2023
Verified Purchase
★★★★★
★★★★★
Worked great!
Thank u for getting this part to me.
It did take a long time to get it, but I was informed that this item was out of stock at the time I placed my order. I was a little concerned as my credit card was billed weeks before I received the part. I was told that this was normal procedure with your business.
However, it was just what I needed and I am so proud to have it. Thank u.
Guest - November 7, 2019
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
My repair was similar to other repairs listed before, but I did have to modify the trunnion shoes/clamps that fit inside the trunnions themselves. The aluminum casting on the replacement parts was thicker than on the OEM parts, so I had to use my oscillating belt sander to take off extra material on the sides of the shoes/clamps so that t
... Read morehey could more easily slide around in the trunnions. After that it was a relatively easy repair.
Unplug saw . Removed table by removing table tilt knobs. Removed the trunnions from table. Put new clamp shoe and hex screw together and place in trunnion ,then put bolts back in.. Now we put table back onto saw and tighten the knobs up . Ready to go. Note the parts that were replaced were made better than the original parts .Thanks erepl
... Read moreacement parts for your service. you will be recommended to others.
Read less
Did you find this story helpful?
Thank you for voting!
Trunnions broke on band saw work table due to too much weight on one side
1. Unplug band saw
2. Remove blade
3. Lift off work table. Trunnions were broken so they did not need to be disconnected.
4. Removed broken trunnions, clamp shoes and adjustment knobs.
5. Install clamp shoes in new trunnions. Used adjustment knobs to pull clamp shoes into new trunnions.
6. Attach trunnions
... Read more to bottom of work table.
7. Attach work table to saw using adjustment knobs.
8. Reinstall blade and check for square.
Remove table, remove trunnion bracket from table, remove knobs from broken trunnions and other associated parts. Place scale on the new outer most trunnion.place trunnions on, trunnion bracket, place assembly on the table. Install the table on the bandsaw. Insert new pin into split in table, insert the new table insert. Attach the dust co
... Read morellection port. I also needed a miter guage.
I bought a bandsaw that was damaged and missing parts. Everything between the table and the saw frame was missing. These parts were ordered from eReplacementParts and received quickly, including the trunnions which i had been told were on backorder until at least September. Installation was pretty straightforward, bolt the mount to the fr
... Read moreame, bolt the trunnions to the table, then install the table assembly to the mount using the special bolts supplied. Although i\'m still looking for a couple of unique parts (handles, etc), i now have a useable 14\" bandsaw.
Read less
Did you find this story helpful?
Thank you for voting!
Brand new 14\" band saw was moderately damaged from from what appeared to be impact damage.
1) disassembled entire machine to inspect/ repair any/ all damaged parts.
2) ordered new wheel tires, table trunnions, door closure stud, table angle scale, and miter gauge.
3) removed oxidation from all existing parts, lubricated all fasteners with anti-sieze, polished & greased all friction parts.
4) honed & waxed tabl
... Read moree top
5) installed set screw hole & screw to top wheel axle housing.
6) installed new wheel tires.
7) replaced both broken table trunnions
8) installed missing table angle scale.
9) installed missing upper & lower door closure studs & knobs.
10) repaired damaged ( cracked/bent) upper wheel with epoxy metal. Balanced & corrected run-out.
11) painted all rusted surfaces.
12) Ereplacement parts , again, had everything that I needed, including a very handy exploded view of my machine.
Read less
Did you find this story helpful?
Thank you for voting!
In moving bandsaw the shoe inside of trunnion pulled through and broke both trunnions. I replaced with new parts but had to grind down both sides of shoes so they would fit into the new part.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
