Genuine OEM sourced replacement part designed for use with Milwaukee band saws. It is made out of rubber and metal. It is sold individually. Due to the use or other factors a cord can crack or get damaged otherwise. It is important to replace a damaged cord before continuing to use your equipment. Please note the cord protector/grommet is sold separately.
Removed brush cover and old brush; dropped the curved end into brush holder and screwed brush cover back on; Do the same for both brushes. Make sure you have inserted the curved end first.
Remove old cord; remover two screws holding cord clamp in place; disconnect wires; and replace with new cord. I soldered a loop connector on
... Read morethe green ground wire and put solder on the naked ends of the white and black wired. Make sure the cord protector is on. Screw in the cord clamp and screw in the ground wire.
Remove blade and old tires, replace tires aligning groves of tires with knobs on wheels.
Replace front and rear blade guides. Each has two screws.
Replace blade
1. remove band saw blade
2. removed drive pulley that wobbles
3. press out (2) old sleeve bearings
4. press in (2) new sleeve bearings
5. reinstall drive pulley with new rubber belt
6. reinstall band saw blade
7. Works like a brand new saw should.
Removed the screw from the handle and the cord clamp
Disconnected the cord wires from the switch and the ground wire
Connected the ground wire and the new cord wires to the switch
Attached the cord clamp
Attached the handle
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10122819
Manufacturer Part Number: 22-64-3200
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_2.gif "Part Location Diagram of 22-64-3200 Milwaukee Cord Set")
_WW_2.gif "Part Location Diagram of 22-64-3200 Milwaukee Cord Set")
